Fujitsu M8000 User Manual

viii SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 2009showdualpowerfeed 347showemailreport 349showenvironment 351showfru 357showh

getflashimage(8)78 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

ioxadm(8)System Administration 79NAME ioxadm - manage External I/O Expansion UnitsSYNOPSIS ioxadm [-f][-p][-v][-M] env [-e][-l][-t][ target [ sensors]

ioxadm(8)80 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPTIONS The following options are supported.OPERANDS The

ioxadm(8)System Administration 81The results are listed in tabular format. Each FRU sensor is listed in the firstcolumn. In the next column is the sen

ioxadm(8)82 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008The results are listed in tabular format. Each FRU senso

ioxadm(8)System Administration 83list [target]Lists the External I/O Expansion Units under system management.If no target is specified, list displays

ioxadm(8)84 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Note – When a power supply is powered off, the LEDs and

ioxadm(8)System Administration 85EXAMPLES EXAMPLE 1 Displaying Temperature, Voltage, Current, and Fanspeed Sensor ReadingsThe External I/O Expansion U

ioxadm(8)86 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 2 Display All Sensor Readings on a Link and Supp

ioxadm(8)System Administration 87In EXAMPLE 3, the list command is used to display the connections betweenExternal I/O Expansion Units and downlink ca

Contents ixtestsb 469traceroute 475unlockmaintenance 479version 481viewaudit 485who 493

ioxadm(8)88 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 8 Displaying Locator LED Status for the External

man(1)System Administration 89NAME man - display manual pages of specified XSCF shell commandSYNOPSIS man command_name ...man -hDESCRIPTION man(1) dis

man(1)90 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007EXIT STATUS The following exit values are returned:0 Successf

moveboard(8)System Administration 91NAME moveboard - move an eXtended System Board (XSB) from the current domain toanotherSYNOPSIS moveboard [[-q] -{y

moveboard(8)92 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPTIONS The following options are supported:-c assign Di

moveboard(8)System Administration 93OPERANDS The following operand is supported:EXTENDEDDESCRIPTION You can execute the moveboard(8) command under th

moveboard(8)94 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009 See the setdcl(8) and showdcl(8) commands for DCL.EXAM

nslookup(8)System Administration 95NAME nslookup - refer to the DNS server for the hostSYNOPSIS nslookup hostnamenslookup -hDESCRIPTION nslookup(8) re

nslookup(8)96 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007EXIT STATUS The following exit values are returned:0 Suc

password(8)System Administration 97NAME password - manage user passwords and expiration settingsSYNOPSIS password [-e days| date|Never][-i inactive][-

x SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 2009

password(8)98 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Refer to setprivileges(8) for more information.OPTIONS

password(8)System Administration 99OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Enabling Password Until February 2, 2008EXAMPLE 2 S

password(8)100 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

ping(8)System Administration 101NAME ping - send the ICMP ECHO_REQUEST packets to the network host or the networkdeviceSYNOPSIS ping [-c count][-q] ho

ping(8)102 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLES EXAMPLE 1 Sends the packet three times to a host na

poweroff(8)System Administration 103NAME poweroff - turn off the power to the specified domainSYNOPSIS poweroff [[-q] -{y|n}][-f][-M] -d domain_idpowe

poweroff(8)104 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXTENDEDDESCRIPTION When the command is executed, a pro

poweroff(8)System Administration 105EXAMPLE 2 Turns off power to domains with domain IDs 0.EXAMPLE 3 Forcibly turns off power to domains with domain I

poweroff(8)106 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009"y" without displaying the prompt.EXIT STATUS

poweron(8)System Administration 107NAME poweron - turn on the power to the specified domainSYNOPSIS poweron [[-q] -{y|n}][-M] -d domain_idpoweron [[-q

Preface xiPrefaceThis manual describes how to use the shell command which can be executed in theXSCF environment in SPARC Enterprise™ M3000/M4000/M500

poweron(8)108 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009 When the poweron(8) command is executed, power-on resul

poweron(8)System Administration 109"y" to the prompt.EXAMPLE 4 Turns on power to domains with domain IDs 1. Automatically replies with"

poweron(8)110 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

prtfru(8)System Administration 111NAME prtfru - display FRUID data on the system and External I/O Expansion UnitSYNOPSIS prtfru [-c][-l][-M][-x][conta

prtfru(8)112 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008/frutree/chassis/iou0/IOU (fru)/frutree/chassis/iou0/IO

prtfru(8)System Administration 113/frutree/chassis/iou0/IOU (fru)/frutree/chassis/iou0/IOU/slot3/frutree/chassis/iou0/IOU/slot3/LINK (container)/frutr

prtfru(8)114 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 2 Displaying A list of Containers/frutree/chass

prtfru(8)System Administration 115EXIT STATUS The following exit values are returned:SEE ALSO ioxadm(8)/frutree/chassis/MBU_B/MEMB#0/MEMB/MEM#2/MEM (c

prtfru(8)116 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

rebootxscf(8)System Administration 117NAME rebootxscf - reset the XSCFSYNOPSIS rebootxscf [[-q] -{y|n}]rebootxscf -hDESCRIPTION The rebootxscf(8) comm

xii SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 2009AudienceThis manual is intended for users, who administrate M3000/M4000/M5000/M8

rebootxscf(8)118 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 2 Resets the XSCF. Automatically replies with

replacefru(8)System Administration 119NAME replacefru - replace a field replaceable unit (FRU)SYNOPSIS replacefrureplacefru -hDESCRIPTION The replacef

replacefru(8)120 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

reset(8)System Administration 121NAME reset - reset the specified domainSYNOPSIS reset [[-q] -{y|n}] -d domain_id levelreset -hDESCRIPTIONNote – Since

reset(8)122 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operand is supported:EXTENDEDDESCRIP

reset(8)System Administration 123EXAMPLE 3 Resets domain ID 0. Suppresses prompts, and automatically answers "y" toall prompts.EXAMPLE 4 Can

reset(8)124 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

resetdateoffset(8)System Administration 125NAME resetdateoffset - reset time of domains to match system timeSYNOPSIS resetdateoffsetresetdateoffset -h

resetdateoffset(8)126 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

restoreconfig(8)System Administration 127NAME restoreconfig - restore the system configuration information previously saved bydumpconfigSYNOPSIS resto

Preface xiiiEach XSCF shell command is described in the order of sections below. When there's norelevant description provided, the section itself

restoreconfig(8)128 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operand is supported:EXTENDE

restoreconfig(8)System Administration 129EXAMPLES EXAMPLE 1 Restoring the Configuration using FTPXSCF> restoreconfig -V -u manilla 129.145.155.156:

restoreconfig(8)130 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 2 Restoring the Configuration Using httpXSC

restoreconfig(8)System Administration 131EXAMPLE 3 Restoring the Configuration Using httpsXSCF> restoreconfig -v -V https://10.7.79.18/sollgell/pro

restoreconfig(8)132 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 4 Restoring the Configuration Using USBEXAM

restoreconfig(8)System Administration 133... transfer from ’/scf/firmtmp/hcp/config/config_file.bin’ to’http://10.7.79.18/sollgell/proxytest.cfg’* Abo

restoreconfig(8)134 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returned:

restoredefaults(8)System Administration 135NAME restoredefaults - delete the setting and the log information that stored in the serveror the XSCF unit

restoredefaults(8)136 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLES EXAMPLE 1 Restores the XSCF unit to t

restoredefaults(8)System Administration 137EXAMPLE 2 Restores the server to the state as of the factory shipment.setdefaults : XSCF clear : unmount fi

xiv SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 2009SPARC Enterprise Mx000 ServersDocumentationThe manuals listed below are provided

restoredefaults(8)138 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008XSCF will be automatically rebooted. Afterward

restoredefaults(8)System Administration 139EXIT STATUS The following exit values are returned:0 Successful completion.>0 An error occurred.

restoredefaults(8)140 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

sendbreak(8)System Administration 141NAME sendbreak - send a break signal to the specified domainSYNOPSIS sendbreak -d domain_idsendbreak [[-q] -{y|n}

sendbreak(8)142 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

setaltitude(8)System Administration 143NAME setaltitude - set the altitude of the system or whether or not the air filter installedSYNOPSIS setaltitud

setaltitude(8)144 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 To apply the specified configuration, execute th

setarchiving(8)System Administration 145NAME setarchiving - configure the log archiving functionalitySYNOPSIS setarchiving [-k host-key][-l audit-limi

setarchiving(8)146 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009OPTIONS The following options are supported:-h Displa

setarchiving(8)System Administration 147-l audit-limit,non-audit-limit Sets the space limits for log archives in megabytes.The option argument must co

Preface xvImportant Safety Information for Hardware Systems C120-E391SPARC Enterprise M3000 Server Safety and Compliance Guide C120-E538SPARC Enterpri

setarchiving(8)148 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009OPERANDS The following operands are supported:EXAMPLE

setaudit(8)System Administration 149NAME setaudit - manage the system auditing functionalitySYNOPSIS setaudit enable|disable|archive|deletesetaudit [-

setaudit(8)150 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008The following are valid classes:all Denotes all class

setaudit(8)System Administration 151The following are valid classes:all Denotes all classes.ACS_SYSTEM(1) System-related eventsACS_WRITE(2) Commands t

setaudit(8)152 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

setaudit(8)System Administration 153OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Changing Classes Using NamesAuditing for LOGIN and

setaudit(8)154 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Warnings will be sent at 50% capacity and 75% capacit

setautologout(8)System Administration 155NAME setautologout - set the session timeout time of the XSCF shellSYNOPSIS setautologout -s timeoutsetautolo

setautologout(8)156 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

setcod(8)System Administration 157NAME setcod - set up the Capacity on Demand (COD) resources used for domainsSYNOPSIS setcodsetcod [-v]setcod [[-q] -

xvi SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 20091. Manuals on the WebThe latest versions of all the SPARC Enterprise series manu

setcod(8)158 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPERANDS The following operands are supported:EXTENDEDD

setcod(8)System Administration 159After this command completes, you will see a message similar to this one in theXSCF console:EXAMPLE 2 Set the COD He

setcod(8)160 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

setdate(8)System Administration 161NAME setdate - set the date and time of XSCFSYNOPSIS setdate [[-q] -{y|n}][-u] -s datesetdate -hDESCRIPTION The set

setdate(8)162 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009 The ntpdate(1M) command is executed in the domain. Reb

setdate(8)System Administration 163tomatically replies with "y" without displaying the prompt.EXIT STATUS The following exit values are retu

setdate(8)164 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

setdcl(8)System Administration 165NAME setdcl - set a domain component list (DCL)SYNOPSIS setdcl -d domain_id -s policy=valuesetdcl -d domain_id -s op

setdcl(8)166 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 Whether to set a priority for the specified LSB as a

setdcl(8)System Administration 167-r Clears the XSB number associated with an LSB number in thespecified domain. On the M3000 server, you cannot speci

Preface xviiNote – The man page can be referenced on the XSCF Shell, and it provides the samecontent as the SPARC Enterprise M3000/M4000/M5000/M8000/M

setdcl(8)168 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008-r Clears the XSB number associated with an LSB number

setdcl(8)System Administration 169OPERANDS The following operands are supported:EXTENDEDDESCRIPTION If the XSB associated with the specified LSB has

setdcl(8)170 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 3 Sets policy=system for domain ID 0.EXAMPLE 4

setdomainmode(8)System Administration 171NAME setdomainmode - set the modes of operation for the specified domainSYNOPSIS setdomainmode [[-q] -{y|n}]

setdomainmode(8)172 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009 Host watchdog and suppress break signal reception,

setdomainmode(8)System Administration 173-m function=mode Sets the modes of operation and specifies its values. Use functionto set the modes of operat

setdomainmode(8)174 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009-m function=mode Sets the modes of operation and spe

setdomainmode(8)System Administration 175EXTENDEDDESCRIPTION When the command is executed, a prompt to confirm execution of the commandwith the speci

setdomainmode(8)176 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009For details of the CPU operational mode and the DR o

setdomainmode(8)System Administration 177 The settings of the current modes of operation for the specified domain can bechecked by using the showdoma

xviii SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 2009b. XSCF extension MIB definition file8. Information on Using the RCI functionT

setdomainmode(8)178 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009EXAMPLE 3 Cancels the setdomainmode(8) command execu

setdomparam(8)System Administration 179NAME setdomparam - forcibly rewrite OpenBoot PROM environment variablesSYNOPSIS setdomparam [[-q] -{y|n}] -d do

setdomparam(8)180 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operands are supported:EXTENDE

setdomparam(8)System Administration 181EXIT STATUS The following exit values are returned:0 Successful completion.>0 An error occurred.

setdomparam(8)182 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

setdscp(8)System Administration 183NAME setdscp - set the IP address assignments for the Domain to Service ProcessorCommunications Protocol (DSCP)SYNO

setdscp(8)184 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Note – The -y and -n options can be used (with or with

setdscp(8)System Administration 185EXAMPLE 1 Assigning All DSCP AddressesEXAMPLE 2 Assigning an Alternative IP address to Domain 1EXAMPLE 3 Specifying

setdscp(8)186 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are returned:SEE

setdualpowerfeed(8)System Administration 187NAME setdualpowerfeed - set dual power feed modeSYNOPSIS setdualpowerfeed -s keysetdualpowerfeed -hDESCRIP

Preface xixModelsThe model names used in this manual are as follows.XSCF User’s Guide SPARC Enterprise M3000/M4000/M5000/M8000/M9000Servers XSCF User’

setdualpowerfeed(8)188 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009message is displayed.EXIT STATUS The following ex

setemailreport(8)System Administration 189NAME setemailreport - set up the email report configuration dataSYNOPSIS setemailreport [-v][-t]setemailrepo

setemailreport(8)190 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007OPTIONS The following options are supported:EXAMP

setemailreport(8)System Administration 191EXAMPLE 4 Enable Email Reporting NoninteractivelyEXAMPLE 5 Sending Test EmailEXIT STATUS The following exit

setemailreport(8)192 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

sethostname(8)System Administration 193NAME sethostname - set a host name and a DNS domain name for an XSCF unitSYNOPSIS sethostname xscfu hostnameset

sethostname(8)194 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPERANDS The following operands are supported:EXTE

sethttps(8)System Administration 195NAME sethttps - start or stop the HTTPS service, which is used in the XSCF network. Thiscommand also performs auth

sethttps(8)196 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPTIONS The following options are supported:OPERANDS The

sethttps(8)System Administration 197 If you omit the value, enclose a space in single or double quotation marks; forexample, " ". If you i

xx SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 2009Prompt NotationsThe following prompt notations are used in the manual.Software Li

sethttps(8)198 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 2 Stops the HTTPS service.EXAMPLE 3 Creates a CS

sethttps(8)System Administration 199without displaying the prompt.EXAMPLE 8 Imports the web server certificate. To exit, press the Enter key and then

sethttps(8)200 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 9 Specifies "\development" to organiza

setldap(8)System Administration 201NAME setldap - configure the Service Processor as a Lightweight Directory Access Protocol(LDAP) clientSYNOPSIS setl

setldap(8)202 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLES EXAMPLE 1 Configuring Bind NameEXAMPLE 2 Conf

setldap(8)System Administration 203EXAMPLE 3 Setting the LDAP TimeoutEXAMPLE 4 Setting the LDAP ServerEXAMPLE 5 Importing a CertificateEXAMPLE 6 Testi

setldap(8)204 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are returned:SEE

setlocale(8)System Administration 205NAME setlocale - set the default locale of the XSCFSYNOPSIS setlocale -s localesetlocale -hDESCRIPTION The setloc

setlocale(8)206 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

setlocator(8)System Administration 207NAME setlocator - control the blinking of the CHECK LED on the operator panelSYNOPSIS setlocator valuesetlocator

Intro(8)Intro 1NAME Intro - list the commands provided by the XSCF firmwareDESCRIPTION Intro(8) command lists the commands provided by the XSCF firmwa

setlocator(8)208 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008EXIT STATUS The following exit values are returned:SEE

setloginlockout(8)System Administration 209NAME setloginlockout - enable or disable login lockout featureSYNOPSIS setloginlockout -s timesetloginlocko

setloginlockout(8)210 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returne

setlookup(8)System Administration 211NAME setlookup - enable or disable the use of the Lightweight Directory Access Protocol(LDAP) server for authenti

setlookup(8)212 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008SEE ALSO showlookup(8)

setnameserver(8)System Administration 213NAME setnameserver - set the domain name system (DNS) servers used in the XSCFnetworkSYNOPSIS setnameserver [

setnameserver(8)214 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised June 2007EXTENDEDDESCRIPTION If multiple DNS servers are spec

setnetwork(8)System Administration 215NAME setnetwork - set or remove an XSCF network interfaceSYNOPSIS setnetwork [-m addr] interface addresssetnetwo

setnetwork(8)216 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPTIONS The following options are supported:OPERANDS T

setnetwork(8)System Administration 217EXTENDEDDESCRIPTION In the M8000/M9000 servers, a takeover IP address can be used without a needto determine wh

Intro(8)2 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009fmdump view fault management logsfmstat report fault manageme

setnetwork(8)218 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009 After you set the network interface, if you disable

setnetwork(8)System Administration 219on XSCF unit 1.EXAMPLE 6 Sets the IP address 192.168.1.10 and netmask 255.255.255.0 for the takeover IPaddress o

setnetwork(8)220 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

setntp(8)System Administration 221NAME setntp - set the NTP information for XSCFSYNOPSIS setntp [-c add] address ...setntp -c del address ...setntp -c

setntp(8)222 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operands are supported:EXTENDEDDESC

setntp(8)System Administration 223 The current NTP server settings set by the setntp(8) command can be checkedby using the showntp(8) command.EXAMPLE

setntp(8)224 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

setpasswordpolicy(8)System Administration 225NAME setpasswordpolicy - manage the system password policySYNOPSIS setpasswordpolicy [-d dcredit][-e expi

setpasswordpolicy(8)226 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008-k difok Sets the minimum number of new char

setpasswordpolicy(8)System Administration 227-k difok Sets the minimum number of new characters (characters whichwere not present in the old password)

Intro(8)Intro 3setdcl set a domain component list (DCL)setdomainmode set a domain modesetdomparam forcibly rewrite OpenBoot™ PROM environment variable

setpasswordpolicy(8)228 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLES EXAMPLE 1 Setting the Minimum Size

setpowerupdelay(8)System Administration 229NAME setpowerupdelay - set the warm-up time of the system and wait time before systemstartupSYNOPSIS setpow

setpowerupdelay(8)230 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009EXAMPLE 2 Sets the wait time before system startup

setprivileges(8)System Administration 231NAME setprivileges - assign user privilegesSYNOPSIS setprivileges user [ privileges][domainprivilege@ domains

setprivileges(8)232 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPERANDS The following operands are supported:do

setprivileges(8)System Administration 233EXAMPLES EXAMPLE 1 Setting Privileges for JSmithEXAMPLE 2 Removing All Privileges for JSmithEXIT STATUS The f

setprivileges(8)234 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008SEE ALSO setpasswordpolicy(8), showuser(8)

setroute(8)System Administration 235NAME setroute - set routing information for an XSCF network interfaceSYNOPSIS setroute -c {add | del} -n address [

setroute(8)236 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009-h Displays usage statement. When used with other options

setroute(8)System Administration 237-h Displays usage statement. When used with other options oroperands, an error occurs.-m address Specifies the net

Intro(8)4 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009setsnmpusm specify the SNMPv3 agent’s User-based Security Mod

setroute(8)238 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009OPERANDS The following operand is supported:EXTENDEDDESCR

setroute(8)System Administration 239 To reflect the routing information to XSCF, execute the applynetwork(8)command. After reflected the information,

setroute(8)240 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009EXIT STATUS The following exit values are returned:SEE AL

setshutdowndelay(8)System Administration 241NAME setshutdowndelay - set the shutdown wait time at power interruption of theuninterruptible power suppl

setshutdowndelay(8)242 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

setsmtp(8)System Administration 243NAME setsmtp - set up the Simple Mail Transfer Protocol (SMTP) settingsSYNOPSIS setsmtp [-v]setsmtp [-s variable= v

setsmtp(8)244 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPTIONS The following options are supported:EXAMPLESEXAMP

setsmtp(8)System Administration 245EXAMPLE 3 Setting Up SMTP Authentication in Interactive ModeEXAMPLE 4 Setting Up Mailserver With Invalid Authentica

setsmtp(8)246 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

setsnmp(8)System Administration 247NAME setsnmp - manage the SNMP agentSYNOPSIS setsnmp enable [ mib_name]setsnmp disable [ mib_name]setsnmp addtrapho

Intro(8)Intro 5showdscp display the IP addresses assigned to the Domain to ServiceProcessor Communications Protocol (DSCP)showdualpowerfeed display th

setsnmp(8)248 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operands are supported:-l system-l

setsnmp(8)System Administration 249addv3traphost Enables the SNMP agent to send SNMPv3 traps or informs to thedesired host. An authentication protocol

setsnmp(8)250 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009addv3traphost Enables the SNMP agent to send SNMPv3 traps

setsnmp(8)System Administration 251default Stops the SNMP agent and changes the SNMP configuration tothe factory default settings. After using this op

setsnmp(8)252 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009enable When used alone, activates the SNMP agent with sup

setsnmp(8)System Administration 253EXAMPLES EXAMPLE 1 Setting Up System InformationEXAMPLE 2 Setting Up and SNMPv3 Trap Host With Password OptionsEXAM

setsnmp(8)254 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

setsnmpusm(8)System Administration 255NAME setsnmpusm - specify the SNMPv3 agent’s User-based Security Model (USM)configurationSYNOPSIS setsnmpusm cre

setsnmpusm(8)256 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008OPERANDS The following operands are supported:clone Mak

setsnmpusm(8)System Administration 257create Makes the supplied user known to the agent for subsequentSNMP communication. When used without the -a or

Intro(8)6 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009showroute display routing information for an XSCF network int

setsnmpusm(8)258 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008EXAMPLES EXAMPLE 1 Adding a User With Password OptionsE

setsnmpvacm(8)System Administration 259NAME setsnmpvacm - modify the SNMPv3 agent’s View-based Access Control Model(VACM) configurationSYNOPSIS setsnm

setsnmpvacm(8)260 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007OPERANDS The following operands are supported:EXAMPL

setsnmpvacm(8)System Administration 261EXAMPLE 2 Create a View of the Entire MIBEXAMPLE 3 Create a View Where the Subtree Is ExcludedEXAMPLE 4 Create

setsnmpvacm(8)262 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

setssh(8)System Administration 263NAME setssh - configure the settings for the Secure Shell (SSH) service used in the XSCFnetworkSYNOPSIS setssh [[-q]

setssh(8)264 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPTIONS The following options are supported:EXTENDEDDESCRI

setssh(8)System Administration 265 The setssh(8) command can register one user public key at a time. In time of setssh(8) command execution, finish

setssh(8)266 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 6 Generates a SSH2 host public key, even if one al

setssh(8)System Administration 267EXAMPLE 10 Specifies the public key number to delete the user public key.EXAMPLE 11 Deletes all user public keys.EXA

addboard(8)System Administration 7NAME addboard - configure an eXtended System Board (XSB) into the domainconfiguration or assign it to the domain con

setssh(8)268 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

settelnet(8)System Administration 269NAME settelnet - start or stop the Telnet service used in the XSCF networkSYNOPSIS settelnet -c {enable | disable

settelnet(8)270 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returned:SEE

settimezone(8)System Administration 271NAME settimezone - set the time zone and Daylight Saving Time of XSCFSYNOPSIS settimezone -c settz -s timezones

settimezone(8)272 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009-d dst Specifies the zone name of Daylight Saving Tim

settimezone(8)System Administration 273-d dst Specifies the zone name of Daylight Saving Time. For dst, specifythe alphabets of 3 letters or more. You

settimezone(8)274 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009-o offset Specifies the offset of time zone and Green

settimezone(8)System Administration 275-p offset Specifies the offset of Daylight Saving Time and Greenwich meantime (GMT). Specify this option in com

settimezone(8)276 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXTENDEDDESCRIPTION You cannot specify the years of

settimezone(8)System Administration 277 The addition of the offset time to the standard time which has been set by thesettimezone(8) command comes to

SPARC Enterprise™M3000/M4000/M5000/M8000/M9000Servers XSCF Reference ManualXSCF Control Package (XCP) 109xPart No. 875-4584-10August 2009, Revision AM

addboard(8)8 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operand is supported:EXTENDEDDESCRI

settimezone(8)278 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009the first Sunday of April 0:00(JST) to the first Sund

setupfru(8)System Administration 279NAME setupfru - set up device hardwareSYNOPSIS setupfru [-m {y | n}] [-x {1 | 4}] device locationsetupfru -hDESCRI

setupfru(8)280 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPERANDS The following operands are supported:EXTENDE

setupplatform(8)System Administration 281NAME setupplatform - set up platform specific settingsSYNOPSIS setupplatform [-v]setupplatform [-v] -p part [

setupplatform(8)282 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008In network setup, the following items can be opt

setupplatform(8)System Administration 283EXAMPLE 3 Enabling ssh.EXAMPLE 4 Configuring the Altitude. xscf#0-lan#0 default gateway: 192.168.1.1Are t

setupplatform(8)284 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 5 Setting the Time Zone.XSCF> setuppl

setupplatform(8)System Administration 285EXIT STATUS The following exit values are returned:SEE ALSO adduser(8), applynetwork(8), password(8), setalti

setupplatform(8)286 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showaltitude(8)System Administration 287NAME showaltitude - display the altitude of the system and whether the air filter installedSYNOPSIS showaltitu

addboard(8)System Administration 9 When the command is executed, a prompt to confirm execution of the commandwith the specified options is displayed.

showaltitude(8)288 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showarchiving(8)System Administration 289NAME showarchiving - display log archiving configuration and statusSYNOPSIS showarchivingshowarchiving [-e][-

showarchiving(8)290 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 20082. Time of the most recent attempt to connect to the

showarchiving(8)System Administration 291EXAMPLE 2 Displaying Archiving Error InformationEXIT STATUS The following exit values are returned:SEE ALSO s

showarchiving(8)292 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008

showaudit(8)System Administration 293NAME showaudit - display the current auditing system stateSYNOPSIS showauditshowaudit [all]showaudit [-a users][-

showaudit(8)294 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2008OPTIONS The following options are supported:-a users Dis

showaudit(8)System Administration 295OPERANDS The following operands are supported:EXAMPLESEXAMPLE 1 Displaying Auditing StatusEXAMPLE 2 Displaying Al

showaudit(8)296 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2008EXAMPLE 3 Displaying All Event InformationEXIT STATUS Th

showautologout(8)System Administration 297NAME showautologout - display the session timeout time of the XSCF shellSYNOPSIS showautologoutshowautologou

addboard(8)10 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

showautologout(8)298 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showboards(8)System Administration 299NAME showboards - display information on an eXtended System Board (XSB)SYNOPSIS showboards [-v] -a [-c sp]showbo

showboards(8)300 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Assignment Domain assignment state of the XSB. Eith

showboards(8)System Administration 301Assignment Domain assignment state of the XSB. Either of the following isdisplayed:Unavailable The XSB cannot be

showboards(8)302 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008When the -v option is specified, the following type

showboards(8)System Administration 303Privileges You must have one of the following privileges to run this command:Refer to setprivileges(8) for more

showboards(8)304 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 2 Displays detailed information on all moun

showboards(8)System Administration 305EXAMPLE 6 Displays the system boards that are defined for domain ID 0 and located inthe system board pool.EXIT S

showboards(8)306 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showcod(8)System Administration 307NAME showcod - display Capacity on Demand (COD) configuration informationSYNOPSIS showcod [-v][-d domain_id]showcod

addcodlicense(8)System Administration 11NAME addcodlicense - add a Capacity on Demand (COD) right-to-use (RTU) license key tothe COD license databaseS

showcod(8)308 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008The output shown is what you would see if you had plat

showcodlicense(8)System Administration 309NAME showcodlicense - display the current Capacity on Demand (COD) right-to-use(RTU) licenses stored in the

showcodlicense(8)310 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 1 Displaying Formatted License DataEXAM

showcodusage(8)System Administration 311NAME showcodusage - display the current usage statistics for Capacity on Demand (COD)resourcesSYNOPSIS showcod

showcodusage(8)312 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXTENDEDDESCRIPTIONThe showcodusage -p resource c

showcodusage(8)System Administration 313EXAMPLES Users with platform administrator privileges can view both resource and domainusage summaries. Users

showcodusage(8)314 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Quad-XSB, CMU02 Uni-XSBXSCF> showcodusage -vRe

showcodusage(8)System Administration 315EXAMPLE 4 Displaying COD Usage by Resource and Domain: M5000 ServerEXIT STATUS The following exit values are r

showcodusage(8)316 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showconsolepath(8)System Administration 317NAME showconsolepath - displays information on the domain console that is currentlyconnectedSYNOPSIS showco

addcodlicense(8)12 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showconsolepath(8)318 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007EXTENDEDDESCRIPTIONOnly one writable console and

showdate(8)System Administration 319NAME showdate - display the date and time of XSCFSYNOPSIS showdate [-u]showdate -hDESCRIPTION The showdate(8) comm

showdate(8)320 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showdateoffset(8)System Administration 321NAME showdateoffset - display the time differences between the time of the system andthe time of the domains

showdateoffset(8)322 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009system and the time of the domains with specifying

showdateoffset(8)System Administration 323EXIT STATUS The following exit values are returned:SEE ALSO resetdateoffset(8)15 901 sec16

showdateoffset(8)324 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

showdcl(8)System Administration 325NAME showdcl - display the current domain component list (DCL)SYNOPSIS showdcl [-v] -ashowdcl [-v] -d domain_id [-l

showdcl(8)326 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Status Domain status. One of the following status is d

showdcl(8)System Administration 327If the -v option is specified, the following information is added:Privileges You must have one of the following pri

addfru(8)System Administration 13NAME addfru - add a Field Replaceable Unit (FRU)SYNOPSIS addfruaddfru -hDESCRIPTION The addfru(8) command adds an FRU

showdcl(8)328 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPTIONS The following options are supported:.EXTENDEDD

showdcl(8)System Administration 329EXAMPLE 3 Displays details in the DCL that are set for all domains.03 -04 01-0 False True Fa

showdcl(8)330 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are returned:SEE

showdevices(8)System Administration 331NAME showdevices - display current information on an eXtended System Board (XSB)SYNOPSIS showdevices [-v][-p by

showdevices(8)332 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009When memory is being disconnected, the following item

showdevices(8)System Administration 333OPERANDS The following operand is supported:EXTENDEDDESCRIPTIONYou can execute the showdevices(8) command under

showdevices(8)334 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 2 Displays detail information of the physical

showdevices(8)System Administration 33500 00-0 2 on-line 2530 5.500 00-0 3 on-line 2530 5.500 00-0 4 on-line 2530 5.500 00

showdevices(8)336 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returned:SE

showdomainmode(8)System Administration 337NAME showdomainmode - display the modes of operation for the specified domainSYNOPSIS showdomainmode -d doma

addfru(8)14 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showdomainmode(8)338 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009Privileges You must have one of the following privi

showdomainmode(8)System Administration 339 OpenBoot PROM diagnostic level (Diagnostic Level), CPU operationalmode (CPU Mode): operates as the showdom

showdomainmode(8)340 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009

showdomainstatus(8)System Administration 341NAME showdomainstatus - display the current domain component list (DCL)SYNOPSIS showdomainstatus -d domain

showdomainstatus(8)342 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Refer to setprivileges(8) for more informatio

showdscp(8)System Administration 343NAME showdscp - display the IP addresses assigned to the Domain to Service ProcessorCommunications Protocol (DSCP)

showdscp(8)344 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2008OPTIONS The following options are supported:EXAMPLESCauti

showdscp(8)System Administration 345EXAMPLE 2 Displaying a Specific Domain’s IP AddressEXAMPLE 3 Displaying a Specific Domain’s IP Address in a Parsab

showdscp(8)346 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2008EXIT STATUS The following exit values are returned:SEE AL

showdualpowerfeed(8)System Administration 347NAME showdualpowerfeed - display the current setting of dual power feed modeSYNOPSIS showdualpowerfeedsho

adduser(8)System Administration 15NAME adduser - create an XSCF user accountSYNOPSIS adduser [-u UID] useradduser -hDESCRIPTION adduser(8) creates a n

showdualpowerfeed(8)348 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showemailreport(8)System Administration 349NAME showemailreport - display the email report configuration dataSYNOPSIS showemailreport [-v ]showemailre

showemailreport(8)350 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised June 2007

showenvironment(8)System Administration 351NAME showenvironment - display the airflow volume, intake air temperature andhumidity, temperature sensor,

showenvironment(8)352 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPTIONS The following options are supported:OPERA

showenvironment(8)System Administration 353EXAMPLE 3 Displays voltage information about each component on the M4000 server. CPUM#2-CHIP#0:30.71C CPUM#

showenvironment(8)354 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 4 Displays the fan speed information on t

showenvironment(8)System Administration 355EXAMPLE 5 Displays the fan speed information on the M3000 server.FAN_A#2: 4177rpmFAN_A#3:Low speedFAN_A#3:

showenvironment(8)356 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 6 Displays power consumption information

showfru(8)System Administration 357NAME showfru - display the hardware settings of specified deviceSYNOPSIS showfru device locationshowfru -a devicesh

adduser(8)16 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLES EXAMPLE 1 Creating a New UserEXIT STATUS The foll

showfru(8)358 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008OPERANDS The following operands are supported:EXTENDEDDESC

showhardconf(8)System Administration 359NAME showhardconf - display information about field replaceable unit (FRU) installed inthe systemSYNOPSIS show

showhardconf(8)360 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXTENDEDDESCRIPTION When the configuration and stat

showhardconf(8)System Administration 361 CPUM#0-CHIP#0 Status:Normal; Ver:0501h; Serial:PP0723016Q ; + FRU-Part-Number:CA06761-D204 A0 /LGA-JUPP-01

showhardconf(8)362 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009 CPUM#0-CHIP#0 Status:Normal; Ver:0501h; Serial:PP07

showhardconf(8)System Administration 363EXAMPLE 2 Displays the number of installed FRUs in the M5000 server. DDC_B#1 Status:Normal; IOU#0 Status:Norma

showhardconf(8)364 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 3 Displays the information of the FRUs in th

showhardconf(8)System Administration 365+ FRU-Part-Number:CA06629-D001 A4 ;+ Memory_Size:128 GB;+ Type:ACPUM#0-CHIP#0 Status:N

showhardconf(8)366 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009CMU#2 Status:Normal; Ver:4201h; Serial:PP0618K472 ;

showhardconf(8)System Administration 367:IOU#0 Status:Normal; Ver:0101h; Serial:PP072102UN ;+ FRU-Part-Number:CA06620-D102 B1 /371-2217-02

applynetwork(8)System Administration 17NAME applynetwork - reflect the information that has been set for the XSCF networkSYNOPSIS applynetwork [[-q] -

showhardconf(8)368 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 4 Displays the number of installed FRUs in t

showhardconf(8)System Administration 369EXAMPLE 5 Displays the information of the FRUs in the M3000 server. | XBU_B |

showhardconf(8)370 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 6 Displays the number of installed FRUs in t

showhardconf(8)System Administration 371EXIT STATUS The following exit values are returned:0 Successful completion.>0 An error occurred.

showhardconf(8)372 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

showhostname(8)System Administration 373NAME showhostname - display the current host name for the XSCF unitSYNOPSIS showhostname {-a | xscfu}showhostn

showhostname(8)374 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 2 Displays the host name for XSCF unit 0.

showhttps(8)System Administration 375NAME showhttps - display the status of the HTTPS service set for the XSCF networkSYNOPSIS showhttpsshowhttps -hDE

showhttps(8)376 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returned:SEE

showldap(8)System Administration 377NAME showldap - display the Lightweight Directory Access Protocol (LDAP)configuration for the Service ProcessorSYN

PleaseRecycleCopyright 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. and FUJITSU LIMITED, 1-1, Kamikodanaka4

applynetwork(8)18 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 Unless all of the host name, DNS domain name, IP

showldap(8)378 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised June 2007SEE ALSO setldap(8)

showlocale(8)System Administration 379NAME showlocale - display the current setting for the XSCF localeSYNOPSIS showlocaleshowlocale -hDESCRIPTION The

showlocale(8)380 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008

showlocator(8)System Administration 381NAME showlocator - display the state of the CHECK LED on the operator panelSYNOPSIS showlocatorshowlocator -hDE

showlocator(8)382 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showloginlockout(8)System Administration 383NAME showloginlockout - display the account lockout settingSYNOPSIS showloginlockoutshowloginlockout -hDES

showloginlockout(8)384 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

showlogs(8)System Administration 385NAME showlogs - display the specified logSYNOPSIS showlogs [-t time [-T time]|-p timestamp][-v | -V | -S][-r][-M]

showlogs(8)386 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPTIONS The following options are supported:-d domain

showlogs(8)System Administration 387-t time Specifies the start date and time of the display range for log data.It is specified in one of the followin

applynetwork(8)System Administration 19On the M8000/M9000 servers: route :Continue? [y|n] :yXSCF> applynetworkThe following network sett

showlogs(8)388 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008-T time Specifies the end date and time of the displa

showlogs(8)System Administration 389OPERANDS The following operands are supported:EXTENDEDDESCRIPTIONLogs are displayed in the following formats: Err

showlogs(8)390 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Case where the -V option is specifiedCase where the -

showlogs(8)System Administration 391Date: Log collection date and time (month day hour:minute:secondtime-zone year)The displayed time is the local tim

showlogs(8)392 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 Power logDate Event Cause DID SwitchMar 30 17:25:31

showlogs(8)System Administration 393 Event logDefaultCase where the -v option is specifiedCause: Factor that caused this StatusOne of the following f

showlogs(8)394 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 TEMPERATURE AND HUMIDITY RECORDDate: Log collection

showlogs(8)System Administration 395 Monitoring message logEach line of display has a date and time paired with a monitoring message. Thetime in the

showlogs(8)396 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008[Second line][Third and subsequent lines]Each line of

showlogs(8)System Administration 397EXAMPLES EXAMPLE 1 Displays an error log.EXAMPLE 2 Displays an error log in detail for the times of the specified

applynetwork(8)20 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 2 Reflects the information that has been s

showlogs(8)398 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 4 Displays a power log.EXAMPLE 5 Displays a p

showlogs(8)System Administration 399EXAMPLE 7 Displays the specified range of a power log. The log is displayed in the orderof timestamps, starting fr

showlogs(8)400 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showlookup(8)System Administration 401NAME showlookup - display the configuration for authentication and privileges lookupSYNOPSIS showlookupshowlooku

showlookup(8)402 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showmonitorlog(8)System Administration 403NAME showmonitorlog - display the contents of monitoring messages in real timeSYNOPSIS showmonitorlogshowmon

showmonitorlog(8)404 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

shownameserver(8)System Administration 405NAME shownameserver - display the registered domain name system (DNS) serversspecified on the XSCF networkSY

shownameserver(8)406 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

shownetwork(8)System Administration 407NAME shownetwork - display information of network interfaces for XSCFSYNOPSIS shownetwork [-M]{-a | -i | interf

applynetwork(8)System Administration 21EXAMPLE 3 Reflects the information that has been set for the XSCF network. Suppressesprompts, and automatically

shownetwork(8)408 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPERANDS The following operands are supported:EXTE

shownetwork(8)System Administration 409 In the M8000/M9000 servers and when the takeover IP address has beendisabled by setnetwork(8) command, nothin

shownetwork(8)410 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 4 Displays the information for XSCF-LAN#0

shownetwork(8)System Administration 411EXAMPLE 7 Displays the information for XSCF unit 0 and XSCF unit 1 in the M8000/M9000 servers.XSCF> shownetw

shownetwork(8)412 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are returned

shownotice(8)System Administration 413NAME shownotice - display copyright and license information for the XSCF ControlPackage (XCP)SYNOPSIS shownotice

shownotice(8)414 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showntp(8)System Administration 415NAME showntp - display the NTP information which currently set for XSCFSYNOPSIS showntp {-l | -a | address | -s | -

showntp(8)416 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009OPERANDS The following operand is supported:EXTENDEDDESCRI

showntp(8)System Administration 417EXAMPLE 3 Displays the stratum value which has been set to XSCF.EXAMPLE 4 Displays whether a preferred server desig

applynetwork(8)22 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showntp(8)418 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009

showpasswordpolicy(8)System Administration 419NAME showpasswordpolicy - display the current password settingsSYNOPSIS showpasswordpolicyshowpasswordpo

showpasswordpolicy(8)420 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007SEE ALSO setpasswordpolicy(8)

showpowerupdelay(8)System Administration 421NAME showpowerupdelay - display the current settings for the warm-up time of thesystem and wait time befor

showpowerupdelay(8)422 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2008

showresult(8)System Administration 423NAME showresult - display the exit status of the most recently executed commandSYNOPSIS showresultshowresult -hD

showresult(8)424 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showroute(8)System Administration 425NAME showroute - display routing information for an XSCF network interfaceSYNOPSIS showroute [-M][-n]{-a | interf

showroute(8)426 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPERANDS The following operand is supported:EXTENDED

showroute(8)System Administration 427EXAMPLES EXAMPLE 1 Displays routing information for XSCF-LAN#0 on XSCF unit 0.EXAMPLE 2 Displays routing informat

cfgdevice(8)System Administration 23NAME cfgdevice - connect the CD-RW/DVD-RW drive unit and the tape drive unit to theport, disconnect it from the po

showroute(8)428 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showshutdowndelay(8)System Administration 429NAME showshutdowndelay - display the shutdown wait time at power interruption of theuninterruptible power

showshutdowndelay(8)430 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showsmtp(8)System Administration 431NAME showsmtp - display the Simple Mail Transfer Protocol (SMTP) configurationinformationSYNOPSIS showsmtpshowsmtp

showsmtp(8)432 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

showsnmp(8)System Administration 433NAME showsnmp - display the configuration information and current status of the SNMPagentSYNOPSIS showsnmpshowsnmp

showsnmp(8)434 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007EXAMPLE 3 Displaying SNMP Information for a Enabled Sys

showsnmp(8)System Administration 435EXIT STATUS The following exit values are returned:SEE ALSO setsnmp(8)Community String: publicEnabled MIB Modules:

showsnmp(8)436 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showsnmpusm(8)System Administration 437NAME showsnmpusm - display the current User-based Security Model (USM) informationfor the SNMP agentSYNOPSIS sh

cfgdevice(8)24 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008Privileges You must have platadm or fieldeng privileg

showsnmpusm(8)438 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showsnmpvacm(8)System Administration 439NAME showsnmpvacm - display the current View-based Access Control Access (VACM)information for the SNMP agentS

showsnmpvacm(8)440 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007SEE ALSO setsnmpvacm(8)

showssh(8)System Administration 441NAME showssh - display the settings of the Secure Shell (SSH) service that configured forthe XSCF networkSYNOPSIS s

showssh(8)442 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXTENDEDDESCRIPTION You can specify the automatically-nu

showssh(8)System Administration 443EXAMPLE 2 Displays the user public key of the current login user account.EXIT STATUS The following exit values are

showssh(8)444 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

showstatus(8)System Administration 445NAME showstatus - display the degraded Field Replaceable Units (FRUs)SYNOPSIS showstatus [-M]showstatus -hDESCRI

showstatus(8)446 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008module in a CPU memory unit are degraded because of

showtelnet(8)System Administration 447NAME showtelnet - display the current status of the Telnet service for the XSCF networkSYNOPSIS showtelnetshowte

cfgdevice(8)System Administration 25 If connection or disconnection is made when the power supply of the system isON, settings are made immediately a

showtelnet(8)448 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

showtimezone(8)System Administration 449NAME showtimezone - display the XSCF time zone and Daylight Saving Time informationof current settingsSYNOPSIS

showtimezone(8)450 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009offset Offset time of time zone and Greenwich mean t

showtimezone(8)System Administration 451offset Offset time of time zone and Greenwich mean time (GMT).Displayed in minus "–" in case the off

showtimezone(8)452 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009 When specified standard:From: ddd MM dd hh:mm:ss y

showtimezone(8)System Administration 453 The settimezone(8) command sets the time zone of the XSCF.EXAMPLESEXAMPLE 1 Displays the time zone.EXAMPLE 2

showtimezone(8)454 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

showuser(8)System Administration 455NAME showuser - display user account informationSYNOPSIS showusershowuser [[-a][-M][-p][-u][user]]showuser [[-a][-

showuser(8)456 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Displays Password and Account Validi

snapshot(8)System Administration 457NAME snapshot - collect and transfer environment, log, error, and FRUID dataSYNOPSIS snapshot -d device [-r][-e [-

cfgdevice(8)26 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLES EXAMPLE 1 When the system is being powered o

snapshot(8)458 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008command. The following example decrypts the filejupit

snapshot(8)System Administration 459-e Encrypts the zip archive. Required when using -P password.-h Displays usage statement.When used with other opti

snapshot(8)460 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008-e Encrypts the zip archive. Required when using -P p

snapshot(8)System Administration 461-P password Used with the -e option, sets the encryption password usedfor encrypting the output file.-p password S

snapshot(8)462 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXTENDEDDESCRIPTIONModes of OperationThe following is

snapshot(8)System Administration 463EXAMPLE 3 Downloading With a User-Provided Public KeyEXAMPLE 4 Log Files Only Using No Public KeyEXAMPLE 5 Downloa

snapshot(8)464 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 6 Downloading Using No Key to Invalid Directo

snapshot(8)System Administration 465EXAMPLE 9 Downloading Public Key Attempted by Unauthorized UserEXAMPLE 10 Downloading to External Media DeviceEXAM

snapshot(8)466 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

switchscf(8)System Administration 467NAME switchscf - switch the XSCF unit between the active and standby statesSYNOPSIS switchscf [[-q] -{y|n}] -t {A

cfgdevice(8)System Administration 27drive unit set on the M9000 server with the expansion cabinet.EXAMPLE 6 Connects the CD-RW/DVD-RW drive unit and t

switchscf(8)468 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXTENDEDDESCRIPTIONWhen the command is executed, a p

testsb(8)System Administration 469NAME testsb - perform an initial diagnosis of the specified physical system board (PSB)SYNOPSIS testsb [[-q] -{y|n}]

testsb(8)470 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPTIONS The following options are supported:.OPERANDS T

testsb(8)System Administration 471 XSB is installed in the domain and this domain is in OpenBoot PROM (ok>prompt) status. XSB is installed in the

testsb(8)472 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLES EXAMPLE 1 Performs the initial diagnosis on PS

testsb(8)System Administration 473EXAMPLE 3 Performs the initial diagnosis on all the PSB that are mounted.EXAMPLE 4 Ignores the settings for the warm

testsb(8)474 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are returned:SEE

traceroute(8)System Administration 475NAME traceroute - display the route packets take to the specified network host or thenetwork deviceSYNOPSIS trac

traceroute(8)476 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operand is supported:EXAMPLESEX

traceroute(8)System Administration 477EXIT STATUS The following exit values are returned: 4 XX.XX.XX.4 36 bytes to 192.168.100.10 2.516 ms 2.229 ms

Copyright 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. et FUJITSU LIMITED, 1-1, Kamikodanaka 4-chome, Nakah

cfgdevice(8)28 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008prompts without displaying messages.EXIT STATUS The f

traceroute(8)478 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

unlockmaintenance(8)System Administration 479NAME unlockmaintenance - forcibly release the locked status of XSCFSYNOPSIS unlockmaintenance [[-q] -{y|n

unlockmaintenance(8)480 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 2 Unlocks the maintenance lock statu

version(8)System Administration 481NAME version - display firmware versionSYNOPSIS version -c xcp [-v][-t]version -c {cmu | xscf}[-v]version -hDESCRIP

version(8)482 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 2 Displays the details of the XCP version.EXAMPLE

version(8)System Administration 483EXAMPLE 5 Displays the version of OpenBoot PROM firmware.EXAMPLE 6 Displays the detailed version of OpenBoot PROM f

version(8)484 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returned:0 Succ

viewaudit(8)System Administration 485NAME viewaudit - display audit recordsSYNOPSIS viewauditviewaudit [-A date-time][-B date-time ][-C][-c classes][-

viewaudit(8)486 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008-B date-time Selects records that occurred before da

viewaudit(8)System Administration 487-B date-time Selects records that occurred before date-time. The date-timeargument is in local time. the -A and -

clockboard(8)System Administration 29NAME clockboard - Set or display the clock control unit used at system startupSYNOPSIS clockboardclockboard -s CL

viewaudit(8)488 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008-c classes Selects records in indicated classes. cla

viewaudit(8)System Administration 489-e events Selects records of the indicated events. events is a comma-separated list of audit events. An event may

viewaudit(8)490 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLES EXAMPLE 1 Displaying Audit Records for Dece

viewaudit(8)System Administration 491EXAMPLE 4 Displaying Audit Records for Successful AccessEXAMPLE 5 Displaying Audit Records Within a Range of Two

viewaudit(8)492 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are returned:S

who(1)System Administration 493NAME who - display a list of the user accounts who are logged in to the XSCFSYNOPSIS whowho -hDESCRIPTION who(1) displa

who(1)494 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

clockboard(8)30 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

console(8)System Administration 31NAME console - connect to a domain consoleSYNOPSIS console [[-q] -{y|n}] -d domain_id [-f | -r][-s escapeChar]consol

console(8)32 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXTENDEDDESCRIPTION When the command is executed, a pr

deleteboard(8)System Administration 33NAME deleteboard - disconnect an eXtended System Board (XSB) from the domainconfigurationSYNOPSIS deleteboard [[

deleteboard(8)34 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPTIONS The following options are supported.OPERANDS T

deleteboard(8)System Administration 35EXTENDEDDESCRIPTION You can execute the deleteboard(8) command under the environment wherethe following service

deleteboard(8)36 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returned:SEE

deletecodlicense(8)System Administration 37NAME deletecodlicense - remove a Capacity on Demand (COD) right-to-use (RTU) licensekey from the COD licens

deletecodlicense(8)38 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are retu

deletefru(8)System Administration 39NAME deletefru - delete a Field Replaceable Unit (FRU)SYNOPSIS deletefrudeletefru -hDESCRIPTION The deletefru(8) c

deletefru(8)40 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

deleteuser(8)System Administration 41NAME deleteuser - delete an XSCF user accountSYNOPSIS deleteuser userdeleteuser -hDESCRIPTION deleteuser(8) delet

deleteuser(8)42 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

disableuser(8)System Administration 43NAME disableuser - disable an XSCF user accountSYNOPSIS disableuser userdisableuser -hDESCRIPTION disableuser(8)

disableuser(8)44 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

dumpconfig(8)System Administration 45NAME dumpconfig - save system configuration information to a fileSYNOPSIS dumpconfig [-v ][-V ][[-q] -{y|n} ][-e

dumpconfig(8)46 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009OPERANDS The following operands are supported:EXAMPLESE

dumpconfig(8)System Administration 47EXAMPLE 2 Dumping the Configuration Using http* Connected to 129.145.155.166 (129.145.155.166) port 8080* Proxy a

vContentsPreface xiIntro 1addboard 7addcodlicense 11addfru 13adduser 15applynetwork 17cfgdevice 23clockboard 29console 31deleteboard 33delet

dumpconfig(8)48 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXAMPLE 3 Dumping the Configuration Using HttpsEXAMPLE

dumpconfig(8)System Administration 49EXAMPLE 5 Encrypting and Password Protecting the ConfigurationEXIT STATUS The following exit values are returned:

dumpconfig(8)50 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

enableuser(8)System Administration 51NAME enableuser - enable an XSCF user accountSYNOPSIS enableuser userenableuser -hDESCRIPTION enableuser(8) enabl

enableuser(8)52 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

exit(1)System Administration 53NAME exit - exit the XSCF shellSYNOPSIS exitDESCRIPTION The exit(1) command exits and closes the XSCF shell.Privileges

exit(1)54 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007

flashupdate(8)System Administration 55NAME flashupdate - update the firmwareSYNOPSIS flashupdate -c check -m xcp -s versionflashupdate [[-q] -{y|n}] -

flashupdate(8)56 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXTENDEDDESCRIPTION When the command is executed, a p

flashupdate(8)System Administration 57EXAMPLE 3 Synchronizes the firmware version of the replaced XSCF units in the M8000/M9000 servers.:XSCF download

vi SPARC Enterprise Mx000 Servers XSCF Reference Manual • August 2009ioxadm 79man 89moveboard 91nslookup 95password 97ping 101poweroff 103power

flashupdate(8)58 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009EXIT STATUS The following exit values are returned:SEE

fmadm(8)System Administration 59NAME fmadm - fault management configuration toolSYNOPSIS fmadm [-q] configfmadm -hDESCRIPTION fmadm (8) can be used to

fmadm(8)60 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007EXAMPLES EXAMPLE 1 Displaying the Fault Manager Configurati

fmdump(8)System Administration 61NAME fmdump - view fault management logsSYNOPSIS fmdumpfmdump [-e][-f][-M][-v][-V][-c class][-t time][-T time][-u uui

fmdump(8)62 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008filter option is present on the command-line, the like o

fmdump(8)System Administration 63The following are the Time Formats:-u uuid Selects fault diagnosis events that exactly match the specified uuid.Each

fmdump(8)64 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008You can append a decimal fraction of the form .n to any

fmdump(8)System Administration 65EXAMPLE 2 Display in Verbose ModeEXAMPLE 3 Display Very Verbose Event Detail for the Last UUIDSep 06 09:38:10.8584 77

fmdump(8)66 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 4 Displaying the Full Fault Report for the Speci

fmdump(8)System Administration 67EXAMPLE 5 Displaying Contents of the Fault Manager syslog Message mod-name = sde mod-ve

Contents viisetlookup 211setnameserver 213setnetwork 215setntp 221setpasswordpolicy 225setpowerupdelay 229setprivileges 231setroute 235setshut

fmdump(8)68 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXIT STATUS The following exit values are returned:SEE A

fmstat(8)System Administration 69NAME fmstat - report fault management module statisticsSYNOPSIS fmstat [-a][[-s][-z][-m module]] [ interval [ count]]

fmstat(8)70 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 Privileges You must have platadm, platop,orfieldeng pri

fmstat(8)System Administration 71If neither count nor interval is specified, a single report is printed and fmstat exits.If an interval is specified b

fmstat(8)72 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 2 Displaying FM Statistics for fmd Self-Diagnosi

getflashimage(8)System Administration 73NAME getflashimage - download a firmware image fileSYNOPSIS getflashimage [-v][[-q] -{y|n}][-u user][-p proxy

getflashimage(8)74 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008OPERANDS The following operands are supported:EXA

getflashimage(8)System Administration 75EXAMPLE 2 Downloading a Version from an ftp ServerEXAMPLE 3 Downloading Using an http Proxy Server With Port 8

getflashimage(8)76 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008EXAMPLE 4 Downloading Using a User Name and Passw

getflashimage(8)System Administration 77EXAMPLE 5 Downloading From a USB Memory StickEXIT STATUS The following exit values are returned:SEE ALSO flash