SERVIS KVM USB Emulation User's Manual 4 Port KVM Switch (FS-1104AU/FS-1104MU) 8 Port KVM Switch (FS-1108
7 (1) LED LEDs indicate states such as the server power status and the selected status. When a cascade connection is not used Server po
8 3: For other cases Status LED display No AC power supply for the KVM Switch (unplugged from power outlet, etc) Blinking green light for a
9 (2) [ServerSelection] switch Pushing the [ServerSelection] switch selects a server. Ports can also be selected when the power status of the server
10 In addition, when the [ServerSelection] switch on the left side of the front panel, the [AutoScan] switch, and the [RESET] switch are pressed at t
11 In this case, devices that are not used are also counted in the number of devices that can be connected. Point When keyboards or mouse dev
12 (12) Connector for the AC Adapter (4 port type only) This connector is used to connect a dedicated AC adapter. Do not use any cords except dedicat
13 9. Installation A KVM Switch can be installed as an external device. It can also be installed in a rack. A 4 port KVM Switch can be installed in a
14 Rack installation (8 port and 16 port types) (1) Remove the console panel from the device. (2) Attach th
15 (3) Attach the device and the operation panel to the rack. * Rack Fixing Bracket Screws are not provided.
16 10. Cable Connection and Removal 10-1. Cable Connection An 8 Port KVM Switch is used as an example to explain how to connect cables. The same proc
この装置は、クラス A 情報技術装置です。 この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。 この場合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A High Safety Required Use This
17 Grounded power outlet Grounded power outlet Monitor (4) (5) Power cable PS/2, USB keyboard, and USB mouse Grounded power o
18 10-1-2. When a Cascade Connection is Used (Level 2 connection) When a cascade connection is used for a KVM Switch (maximum configuration: 1 maste
19 (5) Power cable Grounded power outlet Grounded power outlet Grounded power outlet (4) PS/2, USB keyboa
20 10-2. Power Cord Clamp 10-2-1. 4 Port Type (1) Attaching the Power Cord Clamp The provided Power Cord Clamp is used to attach the DC cable of the
21 10-2-2. 8 and 16 Port Type (1) Attaching the Power Cord Clamp The provided Power Cord Clamp is used to attach power cord. After clamping the cab
22 10-3. Cable Removal Unplug all of the power plugs of devices that are affected by cable removal from the power outlets first before removing cab
23 11. KVM Switch Operation Point Perform the EDID settings first. When a monitor is connected to a KVM Switch for the first time, the Plug and
24 power saving mode, "MODE-1" or "MODE-2" of the Hotkey mode can be used to automatically restore a server in power saving mode.
25 11-1-4. Plug and Play Data (EDID Data) Settings *Note. The power of the monitor must be ON to set the EDID data. (1) Enter MODE-1 of the Hotkey
26 (6) Start the server and write the EDID data. When the <N> key is pressed When the <P> key is pressed
Table of Contents High Safety Required Use 1. PREFACE...
27 (4) Press <P> or the left button of the mouse to return to the SERVER SELECTION screen. If <ESC> or the right button of the mouse is p
28 11-2. Server Selection 11-2-1. Server Switching Function Using Front Panel Operation Point Two types of methods can be selected for the serve
29 When the [ServerSelection] switch is pressed for a long time, server quick selection can be operated. For key typer, the time is changed by press
30 ii. When a cascade connection is used The server can be selected by pressing the [ServerSelection] switch. When this switch is pressed, servers w
31 11-2-2. Server Switching Using the UP/DOWN Switching Method (SELECT-B) i. When a cascade connection is not used The server can be selected by pr
32 ii. When a cascade connection is used The server can be selected by pressing the [ServerSelection] switch. When this switch is pressed, servers w
33 11-2-4. Server Switching Function Using OSD Operation Each server can be selected by using the keyboard and mouse (Hotkey mode). When the power o
34 i. Screen explanation - The KVM Switch status is displayed in the center on the left of the screen (the background color is black) - The status of
35 ii. Server switching method using the OSD screen 1: Selection by using the cursor key - Use <↑>, <↓>, <←>, and <→> to sele
36 3: Selection by using the mouse - Servers can be selecting by using the wheel on the mouse. When the central button (wheel button) or both the rig
1 1. Preface FUJITSU COMPONENT would like to thank you for your purchase of a 4 Port KVM Switch, an 8 Port KVM Switch, or a 16 Port KVM Switch (her
37 iv. Registering and changing the server name (1) Use the console key to register the server name and to change the ports. (2) Press <Tab>.
38 Point Using "Appendix. Server Name Record Sheet" makes registering server names more convenient. Regis
39 "MODE-2" of the Hotkey Mode For "MODE-2" of the Hotkey mode, the server name is displayed on the top left of the OSD. The &q
40 *Note. When ports that are not used in a cascade connection are selected, the ports are set and the Hotkey mode ends. When ports that are used in
41 The background of server name characters becomes pink. Ports of servers with power can be automatically switched at fixed interval
42 The server name is not displayed in the initial state of a KVM Switch. The server name is not displayed when operations are preformed while the co
43 11-5. Supplying Power to a KVM Switch There are two methods available to supply power to a KVM Switch. i. POWER SUPPLY:ALWAYS ON The power is con
44 Point Do not connect any other devices except for AC Adapters (or AC Cables) while performing this setting. 12. Specifications Item Specifi
45 Suppliable current for the keyboard/mouse from the console port PS/2 keyboard 150mA (MAX) PS/2 mouse 150mA (MAX) USB keyboard 300mA (MAX) USB mous
46 USB console USB keyboard, mouse (Low, Full Speed), hub 2 USB connectors The maximum number of connectable devices is as follows: - Maximum total
2 3. Confirming Package Contents Check whether the following items were included in the shipping package by using check marks ( ) in the checkboxes
47 Product Model Number Name Model number Product ID Remarks 4 Port KVM Switch FS-1104AU NC14004-B895-R 8 Port KVM Switch FS-1108AU NC14004-B896-R
48 13. Troubleshooting Symptom Cause Remedy The keyboard and mouse are connected in reverse. (PS/2 only) Connect the keyboard and the mouse correctly
49 Symptom Cause Remedy The connecting cables have been removed. Check the connection, and try again. The KVM Switch is frozen. Press the Reset
50 Appendix. Server Name Record Sheet Use these record sheets to record the names of set servers for the KVM Switch.
51 Slave Unit Port.6 Slave Unit Port.7 Slave Unit Port.8 NO. NAME NO. NAME NO. NAME 1 1 1 2
52 Slave Unit Port.12 Slave Unit Port.13 Slave Unit Port.14 NO. NAME NO. NAME NO. NAME 1 1 1 2
53 NOTE
54 NOTE
55 NOTE
56 4 Port KVM Switch (FS-1104AU/FS-1104MU) 8 Port KVM Switch (FS-1108AU/FS-1108MU) 16 Port KVM Switch (FS-1116AU/FS-111
3 5. Safety Safety Precautions This device adheres to the safety regulations related to information processing equipment such as electronic offi
120601(NC14004-L216-01)
4 7. Features ● Using a KVM Switch enables multiple PC servers to be operated by eliminating the need for multiple consoles (monitor, keyboard, and
5 8. Components Front panel view
6 Rear view Rear view of the 4 Port KVM Switch Rear view of the 8
Comments to this Manuals