Fujitsu Stylistic Q572 Quick Start Guide download pdf (Page 3)

Get Started with your

LIFEBOOK

AH532 Notebook

Page 3 of 5

1. Install the Pen Battery

■ Remove the cap from the end of the pen and insert a AAAA-battery positive end rst. Reinstall the

pen cap.

2. Attach the Pen Tether

■ Take the smaller loop on the pen tether and insert it about half way into the slot in the pen cap.

Thread the tether through the end of the loop extending through the slot. Now take

the larger loop on the tether and insert in the same manner through the attachment point on

the right side of your tablet. Thread the pen through the end of the loop extending through the

attachment point.

3. Connect AC Power

■ Plug the power cord into the AC adapter.

■ Plug the AC adapter into your STYLISTIC Tablet PC.

■ Connect the power cord to an electrical outlet.

4. Booting the System

■ We strongly recommend that you do not attach any external devices until you have gone

through the initial power on sequence.

■ Slide and release the Power/Suspend Resume switch.

■ Your tablet is now on and the battery is being charged.

■ When you turn on your tablet for the rst time, it will display a Fujitsu logo on the screen.

If you do nothing the system will load the operating system, and then the Windows

Welcome will begin.

5. Starting Windows

for the First Time

■ After you boot up the system the rst time and follow the instructions on the screen, you will

eventually come to the Welcome window. After the Welcome window appears, the screen will black

out for up to several minutes. This is normal. DO NOT ATTEMPT TO POWER DOWN THE SYSTEM

AT THIS POINT. While the screen is blacked out, your system conguration is being set up and the

necessary les are being installed.

■ During the course of the rst start up, you will need to read and accept the End User License

Agreements (EULAs) for Microsoft and Fujitsu.

Connect to the Internet or Network

■ Move the Wireless On/Off switch to on. After you have congured your computer, you can connect

Initial Start Up

Pen Cap

Pen Barrel

AAAA-battery

DC Power Jack

AC Adapter

Wireless

Device

Switch

Power/Suspend/

Resume Switch

If you reject the terms of the license agreement you will be asked to review the license agreement for

information on returning Windows

or to shut down your tablet.

You cannot use your tablet. until you have accepted the license agreement. If you stop the process your tablet. will

return to the beginning of the Windows

Welcome Process, even if you shut your tablet. down and start it up again.

DO NOT USE EXCESSIVE FORCE WHEN TAPPING ON THE SCREEN DURING CALIBRATION. USE OF EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE

LED AND/OR TOUCH PANEL

to an active network by clicking on the Wireless Network icon in the system tray

■ Register your STYLISTIC Q702 with Fujitsu Service and Support via our website (http://solutions.us.fujitsu.com/www/content/support/). This helps

us to better serve you.

Activate Additional Utilities, Applications, & Drivers

■ You can launch desktop icon “Fujitsu Bonus Apps” to see if there are any additional applications available for the system. Bonus Apps contains

optional applications. You can select individual or all software that is available. BonusApps will automatically install for you.

Calibrating the Display

In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration Utility before you use the system for the rst

time, or after you change the display resolution.

To run the calibration utility:

■ Go to Start -> Control Panel.

■ Double-click the Tablet Settings icon and select the Display tab

■ Click the [Calibrate] button, then select whether you want to calibrate pen input or touch input.

■ Adjust the display of your tablet to a comfortable angle and nd the (+) symbol in the upper-left corner of the display.

■ Using the stylus or your nger (depending upon which type of input you are calibrating), rmly touch the screen directly on the (+) symbol. Lift the

stylus from the screen and the target will move to a different location on the screen.

■ Repeat the previous step until you have selected all of the (+) symbols.

■ Once you have selected all the symbols, press the [OK] button.

■ Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not satised with the screen’s calibration,

press the [Calibrate]) button to begin again.

9. Create backup media with MyRecovery

■ Click on the [MyRecovery] icon to create backup recovery media discs. (You will need to use an external optical drive.)

■ Look in the User’s Guide (Troubleshooting Your STYLISTIC Q702) for more detailed instructions.

10. User’s Guide

■ Your electronic User’s Guide contains important detailed information about your new computer. You can access your User’s Guide by selecting its icon

from the screen desktop. (You will need to be connected to the Internet.)

1 2 3 4 5

Comments to this Manuals

No comments

Fujitsu Stylistic Q572 Quick Start Guide Page 3

Comments to this Manuals

Related products and manuals for Handheld mobile computers Fujitsu Stylistic Q572