Fujitsu ST5010 User's Guide download pdf (Page 72)

Stylistic ST5000 Series Tablet PC User’s Guide – Appendix

Troubleshooting

Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the

following table.

Problem Possible Cause Possible Solution

Unavailable

network

connection

Incorrect network

name (SSID) or

network key

Ad hoc connection: verify that the network names (SSID’s) and network

keys (WEP) of all computers to be connected have been configured

correctly. SSID’s and WEP key values must be identical on each machine.

Access Point (Infrastructure) connection: set the network name (SSID)

and network key to the same values as those of the access point.

Set the Network Authentication value identically to that of the Access

Point. Please consult your network administrator for this value, if

necessary.

For the method of setting network authentication, refer to the following

pages:· “Assigning parameters” on page 55·

Poor radio wave

condition

Ad hoc connection: Retry connection after shortening the distance to

the destination computer or removing any obstacles for better sight.

Access Point (Infrastructure) connection: Retry connection after short-

ening the distance to the access point or removing any obstacles for

better sight.

To check the wave condition, refer to the following pages:· “Confirming

the status of the radio waves” on page 59.·

Radio wave

transmission has

stopped

Check if the wireless switch is turned ON. Also verify “Disable Radio” is

not checked in “Network setting” window. Refer to “Starting Transmis-

sion” on page 54.

The computer to be

connected is turned

off

Check if the computer to be connected is turned ON.

Active channel

duplication due to

multiple wireless

LAN networks

If there is any other wireless LAN network nearby, change channels to

avoid active channel duplication. For the method of checking active

channels, refer to the following pages:· “Confirming the status of the

radio waves” on page 59·

No right of access to

the network to be

connected

Check if you have a right of access to the network to be connected with.

Incorrectly-

performed network

setting

Check the protocol, work group name or shared setting.

For the method of checking, refer to the following pages:· “Connection

to the Network” on page 57.

Unmatched

[Network

authentication

(shared mode)]

settings in Windows

If the setting of [Network authentication (shared mode)] is not matched

with that of access point or computer to be connected with, no commu-

nication can be established. Check the parameter setting.Refer to

“Assigning parameters” on page 55.

Ocampa2_UG.book Page 62 Thursday, February 19, 2004 5:23 PM

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 81 82

Comments to this Manuals

No comments

Fujitsu ST5010 User's Guide Page 72

Comments to this Manuals