Fujitsu fi-5110C User Manual download pdf (Page 22)

AP-1

Appendix 1 TROUBLESHOOTING

■ Troubleshooting checklist

Symptom Check this item Remedy

Scanner does not turn

on.

Have you pressed the power

button on?

Push the power button in to turn the scan-

ner.

Are the AC cable and AC adapter

properly connected to the scan-

ner?

Correctly connect the AC cable and the AC

adapter.

Disconnect the AC cable and the AC

adapter from the scanner, then connect

them again.

If this does not restore the power supply,

contact the store where you purchased the

scanner or an authorized FUJITSU scanner

service provider.

Are you using the correct AC cable

and AC adapter supplied with the

scanner from the manufacture?

You must use the AC adapter and cable

supplied with your scanner by the

manufacture. Please get the correct AC

adapter and cable to connect to your scan-

ner.

Scanning does not

commence.

Are the documents loaded properly

on to the ADF paper chute?

Realign and reload the documents on to

ADF paper chute.

Is the ADF closed completely? Close the ADF completely.

Is the USB cable cable connected

securely?

Connect the cable. (When a USB hub is

used, check the hub's power supply.)

Does the Function Number display

indicates an alarm or an error?

When the Function Number display indi-

cates an alarm or an error, refer to "Chap-

ter 6 TROUBLESHOOTING" in the fi-

5110C Operator’s Guide for removing the

alarm or the error.

The alarm status remain displayed

even after the scanner has been

turned off and on again?

Turn off and on the power button.

If this does not eliminate the alarm status,

contact the store where you purchased the

scanner or an authorized FUJITSU scanner

service provider.

Vertical lines appear in

the printed image.

Is the glass dirty? Clean the glass as instructed in the Opera-

tor's Guide "4. Daily Care".

The scanned printed

image appears shifted or

distorted.

Have the documents been loaded

correctly?

Reload the documents correctly.

Quality of the scanned

image is not satisfactory.

Is the glass clean? Clean glass and otther dirty locations

around glass and ADF.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments

Fujitsu fi-5110C User Manual Page 22

Comments to this Manuals