Fujitsu C-4120 User Manual download pdf (Page 69)

Four

User Installable Features

LifeBook C Series from Fujitsu

55

CAUTION

The memory upgrade module can be

severely damaged by electro-static

discharge (ESD). Be sure you are

properly grounded when handling

and installing the module.

10. Press the memory upgrade module down

into the compartment until it lodges under

the retaining clip. You will hear a click

when it is properly in place.

11. Lay the ﬂap of plastic sheeting back

into place.

12. Flip the keyboard back over, and slide it

back into place with the tabs going into the

slots to the front of the notebook and hold-

ing the back of the keyboard approximately

on quarter inch up.

13. Let the back of the keyboard down, back

into place.

14. Carefully press the panel which you

removed back into place

15. Replace the screws and the screw covers.

The memory upgrade module is not something

you routinely remove from your notebook.

Once it is installed, you should leave it in

place unless you want to increase system

memory capacity.

6. Flip the keyboard away from you, and set it

down on the screen.

7. In the center of the plastic sheeting under the

keyboard is a small notch facing the right

side on your notebook. Ease your ﬁngernail

under this notch, and lift the ﬂap to your left,

exposing the memory upgrade slot.

Figure 4-4 Installing a Memory Upgrade Module and

closing the compartment

8. Align the memory upgrade module with the

chip side up. Align the connector edge of the

memory upgrade module with the connector

slot in the compartment. The connector will

be pointing toward your right. (Figure 4-4.)

9. Insert the memory upgrade module at a

45° angle. (Figure 4-4.) Press the connector

edge of the module ﬁrmly down and into

the connector.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 119 120

Comments to this Manuals

No comments