Fujitsu ST5030D User's Guide download pdf (Page 32)

Stylistic ST5000 Series Tablet PC User’s Guide – Section Two

Table 2-1 Changing System States

* Information in Table 2-1 on page 22 is supplied to help you understand which system states your system can enter from

the current system state. Refer to the procedures on starting the system, shutting down the system, suspending system

operation, and resuming system operation given later in this chapter.

†

Your system may be configured to use either Suspend-to-RAM mode or Hibernate mode.

POWERING UP THE TABLET PC

Follow the procedure below to start the Stylistic ST5000

Series Tablet PC. Before you begin, confirm that the

system is in the Off state. To do so, observe the Status

display. If the Power icon is not visible in the Status

display, the system is in Off state or in Hibernate (Save-

to-Disk) mode and it is safe to perform this procedure. If

the Power icon is visible (either blinking or on continu-

ously), do not perform this procedure. See “System

States” earlier in this chapter for details on modes repre-

sented by the Power icon.

1. Ensure that the battery in your Tablet PC is

sufficiently charged, or connect an external power

source such as the AC adapter or auto adapter to

your Tablet PC.

2. Press the Power On/Suspend/Resume button to start

the system.

After performing initialization, the system starts the

operating system installed on the hard disk drive. Once

the operating system is running, you can use the system.

SHUTTING DOWN THE SYSTEM

Follow these steps to shut down and turn off your

system:

1. If system operation has been suspended, resume

system operation. See “Resuming System Opera-

tion” later in this chapter for details.

2. Save your work and close all running programs.

3. Choose Shut Down from the Windows Start menu.

4. Carry out the Shut Down command.

The system is now in the Off state.

SUSPENDING SYSTEM OPERATION

The Tablet PC allows you to suspend the system opera-

tion without closing programs or exiting the operating

system. Use this feature to conserve battery power when

a system shutdown is not practical or when the battery

needs to be changed.

Icon Appearance Current State

To Change State

Power icon

displayed

continuously

On State

Idle State

To enter the Off state, shut down the system using the Start menu on your

system.

To enter Suspend-to-RAM or Hibernate (Save-to-Disk)

†

state, suspend system

operation using either a hardware or software suspend.

Power icon blinking Suspend-to-

RAM

†

To enter the On state, resume system operation by pressing the Suspend/

Resume button.

To enter the Off state, resume system by pressing the Suspend/Resume

button, then shut down your system.

Power icon not

displayed

Off State, or,

Hibernate

(Save-to-Disk

†)

To enter the On state, start your system, or resume system operation by

pressing the Suspend/Resume button.

If you have set your system to turn power

off from the Power Options utility in the

Control Panel, the following procedure will

not be possible, since pressing the button

shuts the system down rather than

suspending it. To change your power

options, go to Start -> Settings -> Control

Panel -> Power Options.

Niechen_UG.book Page 22 Thursday, July 14, 2005 3:52 PM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 95 96

Comments to this Manuals

No comments

Fujitsu ST5030D User's Guide Page 32

Comments to this Manuals

Related products and manuals for Laptops Fujitsu ST5030D