Fujitsu T4220 User Manual download pdf (Page 41)

Getting to Know Your Tablet PC

1. Attach the end of the pen tether with the smaller

loop to your pen. To do so, push the end of the

tether through the hole in the pen, then thread the

opposite end of the tether through the loop. (See

Figure 2-26.)

Figure 2-26. Installing a Pen Tether

2. Attach the end of the pen tether with the larger loop

to the attachment point on your tablet. To do so,

insert the end of the pen tether through the attach-

ment point, then feed the pen through the large

loop in the tether.

CALIBRATING THE PEN

In order to ensure accurate tracking between the pen

and cursor, you must run the Touch Screen Calibration

Utility before you use the active digitizer for the first

time, or after you change the display resolution.

To run the calibration utility:

1. Go to Start -> Control Panel and double-click on

the Tablet and Pen Settings icon.

2. Click Calibrate.

3. Adjust the display of your Tablet PC to a comfort-

able angle.

4. Using the pen, firmly touch the screen directly on

the (+) symbol; the (+) symbol will move to the

next location.

5. Repeat step 4 in the four corners, then click OK.

REPLACING THE PEN TIP

With use, the pen tip may become worn or may pick up

foreign particles that can scratch the screen. A damaged

or worn tip may not move freely, causing unpredictable

results when using the pen. If your pen exhibits these

problems, you should replace the pen tip. To do so, use

the pen tip removal tool included with your pen.

To remove the tip, position the tip in the gap between

the two ends of the tool (Figure 2-27). Pinch the tool

together so the tip is firmly clasped, then pull it from the

barrel. If the tip is worn or damaged, discard it.

Figure 2-27. Tip Removal Tool

To replace the tip, retrieve one of the new tips that

accompanied your pen. Insert the flat end of the tip into

the barrel and push it in firmly until it is seated.

If you need more tips, they can be ordered from the

Fujitsu Website at: us.fujitsu.com/computers.

USING THE ACTIVE DIGITIZER

The integrated active digitizer allows you to use the

included pen as a pointing device. You can use the pen

to click, double-click, drag items and icons, or to draw

like a pen or pencil in applications that support this

behavior, such as drawing or painting programs. See the

documentation that came with your application for

details. (Figure 2-28)

Figure 2-28. Using the pen with the screen

Clicking

To left-click, touch the object you wish to select and then

lift the pen tip immediately. (Figure 2-29)

To right-click, press the front button on the barrel

switch or touch the pen to the screen for a couple of

seconds until the right mouse icon appears at the tip.

Smaller loop

Larger loop

Pen tether

attachment

point

To avoid potential scratching and damage,

never use anything but the included pen

with the display.

To purchase additional or replacement

pens, visit the Fujitsu accessories Website

at: http://us.fujitsu.com/computers.

Gap

T Series.book Page 31 Wednesday, April 25, 2007 11:29 AM

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 135 136

Comments to this Manuals

No comments

Fujitsu T4220 User Manual Page 41

Comments to this Manuals

Related products and manuals for Laptops Fujitsu T4220