SERVIS 8-port KVM Switch Integrated Console Drawer [FD-1008AT] 16-port KVM Switch Integrated Console Drawer [FD-1016AT] User’s Manual
7 Installation Please note the safety information in [Important Notices]. Maintain the area around the equipment when using the Console Drawer (See
8 Installing tapped guide rails diagram
9 Installing Console Drawer Be careful that the latch lever (see page 17) does not come loose. If the latch lever becomes loose, the Console Drawer
10 Names and Functions of Parts ● Overview ● Console switches The five buttons and two LEDs on the monitor are explained
11 ● Rear Panel 8-Port KWM Switch (1) (2) (3) (4) (5) (6) (7) 8-port KVM Swi
12 DIP Switch Settings The factory default settings are as follows: 1 2 3 4 5 6 7 8 ON OFF (*Note: the indicates the switch positi
13 Connecting and Removing Cables Read the Console Drawer manual before connecting the cables. Do not connect or remove the cables during a thunder
14 5. In the case of a cascaded connection (when KVM Switch is connected in a two-level connection) By using cascaded connectio
15 Removing Cables Unplug the power cords, from the power outlets, of all the equipment that are effected, then
16 Operation Pull the Console Drawer toward slowly until the slide rails lock. If they do not lock, the weight of the Console Drawer may cause it
I Declaration of Conformity Model Number : FD-1000 ATseries Trade Name : Console Drawer Responsible party : FUJITSU COMPONENT AMERICA,
17 Open the monitor completely. Opening the LCD diagram
18 Adjusting the Monitor The five buttons and two LEDs on the monitor are explained in order from left to right. Power button: Push this but
19 Basic Adjustment Procedure 1. Push the menu button to open the menu. Example of menu screen display 2. Select the item to be adjusted with t
20 Symbol Displayed term Adjustment details Brightness Adjust the brightness. Contrast Adjust the contrast. H.Position Adjust the horizonta
21 Resolution and Refresh Rate Mode Resolution Horizontal frequency (KHz) Vertical frequency (Hz) 31.47 60.0 37.86 72.0 600 × 480 37.5 75.0 37.9
22 Hot-Key SW operations To display the OSD menu for switching the server, press in and release this switch. Keyboard Operation, LED Indicators and
23 Pointing Device Operation Lightly touch or tap the operation surface to operate the pointing device. Moving the pointer: Just lightly touch the
24 Switching the Server A server can be selected from the OSD menu (Hot Key Mode). When a currently selected server is turned OFF, that state will b
25 1) OSD in a non-cascaded connection (Hot Key Mode A) (Different from actual server name display) 2) OSD screen in a cascaded connection (Hot Ke
26 3) Changing the master/slave display when there is a cascaded connection (Hot Key Mode A) Cascade-connected master channel selected
II
27 How to switch the server on the OSD screen Switching in Hot Key Mode A The following OSD screen is displayed if you enter Hot Key Mode A after p
28 b. [Direct Switching Via Keyboard] 8-port KVM Switch 1) Use the number keys <1>~<8>. For a cascaded setup, first use the number ke
29 Switching in Hot Key Mode B The OSD menu is displayed at the top left of the screen when the <Ctrl> key is pressed twice and Hot Key Mode B
30 <Enter> key: Console switches to the currently displayed screen <Esc> key: Console reverts to the server active before Auto Scan Mod
31 Constant Server Name Display Function When the device is operating in normal Console Mode, holding the <Shift> key down and pressing the &
32 EDID Setting Mode After pressing the Hot-Key SW, the <Ctrl>+<Alt>+<Shift> keys or double pressing the <Scroll Lock> to ac
33 The EDID Setting Mode may be ended as follows: Press the <P> key to return to the Server Selection screen. Press the <Esc> key to esc
34 Inserting the slide module diagram Cleaning Console Drawer Turn off the power and unplug the power cable from the p
35 Technical Specifications Item Specification Product ID (KVM Switch Integrated Console Drawer) FD-1008AT FD-1016AT Number of Connected Servers
36 Item Specification Product ID FD-1008AT FD-1016AT Current Supply to Keyboard/Mouse Max. 300mA Max. 150mA Voltage AC100 − 240V 50/60Hz Powe
1 Contents PREFACE...
37 Troubleshooting Symptom Cause Action The AC cord is not connected to the electric outlet or to the switch device. Connect the AC cord. The AC p
38 Symptom Cause Action Cascaded connections are not recognized. A problem has occurred at the switcher. Press the reset switch. (Both the slave
39 Note
KVM Switch Integrated Console Drawer [FD-10XXAT Series] User’s Manual Published Nov 2003 Published by FU
This manual is made of recycled paper. 031222 NC14004-L525 01
2 Preface Congratulations on your purchase of a server rack-mountable KVM Switch Integrated Console Drawer. Using this product will greatly improv
3 Please note the safety information in [Important Notices]. 1. Check the package delivered and whether the Console Drawer has been damaged when
4 Important Notices This chapter contains cautions that must be taken when operating the Console Drawer and information related to safety. Careful
5 ● Only licensed personal can uncouple, remove or switch parts (such as electro-magnetic wave devices) which bear a warning mark (such as a lighte
6 ● When using a mouse with a scroll function such as a mouse with PS/2 wheel, scrolling outside of the support sometimes does not function proper
Comments to this Manuals