Fujitsu fi-5120C User Manual download pdf (Page 24)

AP-2

Paper is not fed (pick error

occurs frequently, or docu-

ment stops midway).

Do the documents satisfy the "Docu-

ment Quality" and the "Multi feed

Detection Conditions" in the chapter 6

of the fi-5530C Operator’s Guide?

Use the documents that satisfy the "Document

Quality" and the "Multi feed Detection Condi-

tions" in the chapter 6 of the fi-5530C Operator’s

Guide.

Is the Pick roller dirty? Clean the Pick roller. Refer to Operator's Guide in

"3.3. Cleaning the ADF".

Is the Pick roller worn out? Change the Pick roller. Refer to Operator's Guide

in "4.3. Replacing the Pick Roller".

Is there any dirt or dust in the document

feed path?

Remove any dirt or dust from the document feed

path.

The generated images are

elongated.

Are the Feed rollers dirty? Clean the Feed rollers. Refer to Operator's Guide

in "3.3. Cleaning the ADF".

Have you adjusted the scan scale? For Windows 98, Windows Me, Windows 2000,

WindowsXP, select "Scanners and Cameras" in

the control panel, then click the [Device Set] tab

to adjust scale.

For Windows 95, Windows NT 4.0, right click the

Scanner Control Center in the task tray, select

[Options] and adjust the scan scale.

There is a shadow on the

leading edge of the gener-

ated image.

Are the Feed rollers dirty? Clean the Feed rollers. Refer to Operator's Guide

in "3.3. Cleaning the ADF".

Have you adjusted the offset (the scan-

ning starting position)?

For Windows 98, Windows Me, Windows 2000,

WindowsXP, adjust the [Sub-scan Setting] on

[Scanners and Cameras] in the control panel.

For Windows 95, Windows NT 4.0, right click the

Scanner Control Center, select [Options]-[Sub-

scan Setting] and adjust the offset.

Symptom Check this item Remedy

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Fujitsu fi-5120C User Manual Page 24

Comments to this Manuals

Related products and manuals for Scanners Fujitsu fi-5120C