Fujitsu ST4000 User Manual download pdf (Page 9)

Tablet Dock User’s Guide

9

LOADING MEDIA

(Refer to Figure 8 for the following steps)

To load a disc into your media player drive,

follow these steps:

1. Push and release the eject button on the

front of the drive to open the holder tray. The

tray will come out of the system a short

distance.

2. Gently pull the tray out until a media disc

can easily be placed in the tray.

3. Place the media into the tray, label side up,

with the hole in the center of the disc. Snap

the disc onto the raised circle in the center

of the tray.

4. Gently push the holder tray back in until you

hear a click.

REMOVING MEDIA

(Refer to Figure 8 for the following steps)

1. Push and release the eject button on the

front of the media player drive. This will stop

the drive and the holder tray will come out

of the system a short distance.

2. Gently pull the tray out until the disc can

easily be removed from the tray.

3. Carefully remove the media disc from the

holder tray.

4. Gently push the holder tray back in until

youhear a click.

Do not operate your media drive unless your

system is sitting on a relatively flat surface.

Using the drive when the system is not level

may damage the drive or prevent proper

operation.

There may be a protective sheet in the tray

from when it was shipped; please make sure

it is removed before operating the drive.

Figure 8. Loading/Ejecting Media

Tablet Dock(8-10) 24/3/03, 10:38 AM9

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments