Fujitsu V810 User Manual download pdf (Page 28)

Operation

20 A26361-K680-Z122-1-7619, Edition 1

Working with floppy disks

Follow the instructions supplied by the vendor of the floppy disks.

Never clean the floppy disk drives with cleaning disks. Any attempt would destroy the

read/write head in the disk drive within 20 seconds.

1 = Insertion direction

2 = Label area

3 = Write protection tab for a 1.44 Mbyte floppy disk

4 = Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk

5 = Eject button for inserted floppy disks

6 = Disk is write-protected

7 = Disk is not write-protected

To insert a diskette

► Push the floppy disk into the drive in the insertion direction (1) until it engages. The label

should be facing upward.

To remove a diskette

► Push the eject button (5).

Protect the floppy disk against being overwritten or erased

► Slide the write-protect slider into position (6). The hole is now visible.

Deactivate write protection

► Slide the write-protect slider into position (7). The hole is now covered.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

No comments

Fujitsu V810 User Manual Page 28