Fujitsu S6510 User Manual download pdf (Page 73)

- Lithium ion Battery

Replacing the Battery

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not

charged. There are two ways to swap batteries, cold-swapping and hot-swapping:

Cold-swapping Batteries

To cold-swap batteries in your battery bay follow these easy steps:

1 Have a charged battery ready to install.

2 Shut down your notebook and disconnect the AC adapter.

3 Orient your system as shown in Figure 22.

4 Push the right battery latch to the right to unlock it.

5 Push the spring-loaded left battery latch to the left. While holding it, lift the battery out of the battery bay at the

battery lift point.

6 Insert a new battery into the bay, and press it down so that the latches click into place.

7 Plug in the AC adapter and turn the power on.

Hot-swapping Batteries

To hot-swap batteries in your battery bay follow these easy steps:

1 Plug an AC Adapter into the system and connect it to a power outlet.

E SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE

BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT

USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 202 203

No comments

Fujitsu S6510 User Manual Page 73