Fujitsu T4010 User Manual download pdf (Page 21)

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security

features of your tablet to fit your operating needs and to

view the current data security configuration. Follow the

instructions for Navigating Through the Setup Utility to

make any changes. (See Navigating through the Setup

Utility on page 2 for more information)

The following tables show the names of the menu fields

for the Security menu and its submenus, the options for

each field, the default settings and a description of the

field's function and any special information needed to

help understand the field's use. The default condition is

no passwords required and no write protection.

Figure 13. Security Menu

Entering a password incorrectly three times

in a row will cause the keyboard and

mouse to be locked out and the warning

[System Disabled] to be displayed. If

this happens, restart the computer by

turning off and on the power with the

power switch and use the correct

password on reboot. Note: Unless you

have previously enabled the power switch

in the BIOS, it will not be possible to turn

off the unit with the switch. This is

applicable for non-ACPI OS’s.

■

If you set a password, write it down and

keep it in a safe place. If you forget the

password you will have to contact your

support representative to regain access

to your secured functions and data.

■

If you make an error when re-entering

the password a [Warning] will be dis-

played on the screen. To try again press

the [Enter] key and then retype the pass-

word. Press the [Esc] key to abort the

password setting process.

■

If the Password on Boot is Disabled you

will not have to type your password

upon resuming the system from the Sus-

pend or Save-to-Disk modes.

F1 Help

ESC Exit

Select Item

Select Menu

-/Space

Enter

F9 Setup Defaults

F10 Save and Exit

Change Values

Select Sub-Menu

▲

Main Advanced Security Boot Info Exit

Item Specific Help

Press <Enter> key to

set Supervisor Password

to enable any password

features.

Then password entry is

required to enter BIOS

Setup.

PhoenixBIOS Setup Utility

▲ ▲

Supervisor Password Is: Clear

User Password Is: Clear

Set Supervisor Password [Enter]

Set User Password [Enter]

Minimum User Password Length: [0]

Password on Boot: [Disabled]

On Automatic Wake up: [Disabled]

Boot from Removable Media: [All]

Flash Write: [Enabled]

Hard Disk Security

Owner Information

Security Chip Setting

Security Panel On Resume: [Enabled]

▲

Security Menu

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Fujitsu T4010 User Manual Page 21

Comments to this Manuals

Related products and manuals for Security device components Fujitsu T4010