Data Sheet Fujitsu PRIMERGY TX200 S6 Server
Page 4 / 10 www.fujitsu.com/fts
Memory Modules Mirrored Mode 4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
Memory Modules Spare or Performance
Mode
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
Interfaces
USB ports 10 x USB 2.0 (3x front USB, 4x rear USB 3x internal for backup, USSD and internal USB)
Graphics (15-pin) 1 x VGA
Serial 1 (9-pin) 1 x serial RS-232-C (9 pin), usable for iRMC S2 or System or common use
Serial 2 (9-pin) 1 x serial RS-232-C (9 pin), optional - occupies an unused slot
LAN / Ethernet (RJ-45) 1 x Gbit/s Ethernet (Intel Hartwell)
Service LAN (RJ45) Service LAN trafc can be switched to shared onboard Gbit LAN port
1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s)
Onboard or integrated Controller
SATA Controller ICH10R, 6-port SATA (4x for internal hard disks, 2x for accessible drives)
SATA controller type notes On board SATA controller supports RAID levels 0, 1, 10
Remote Management Controller Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Trusted Platform Module (TPM) Inneon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 2.0 x4 (mech. x8) 2 x Full height (1x long, 1x short)
PCI-Express 2.0 x8 2 x Full height (1 slot is notched. It is therefore also usable for x16 cards operating in x8 mode).
PCI-Express x4 (mech. x8) 1 x Full height
PCI-slots 1 x
Slot Notes PCI slot: 32-bit / 33 MHz, 5 V; in SAS-congurations 1x PCI-Express slot is occupied by the modular RAID controller.
Drive bays
Storage drive bay conguration 4x 3.5-inch, for SAS / SATA or 8x 2.5-inch for SAS/SATA optional
Accessible drive bays 3 x 5.25/1.6-inch
Notes accessible drives All possible options described in relevant system congurator.
Optional hard disk bays 2 x 3.5-inch hot-plug SAS/SATA or 8x 2.5-inch hot-plug SAS in HDD box (occupies 2x 5.25-inch bays)
Fan Conguration
Fan conguration 2 standard fans or 2 redundant fans (only available in combination with hot plug redundant power supply)
Operating panel
Operating buttons On/off switch
NMI button
Reset button
Status LEDs System status (orange / yellow)
Identication (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identication (blue)
LAN connection (green)
LAN speed (green / yellow)
Service display Optional:
ServerView Local Service Panel (LSP)
Comments to this Manuals