Fujitsu PRIMERGY BX600 S2 User Manual download pdf (Page 113)

PRIMERGY BX600 S2 Basic Unit 113

11 Fibre Channel Pass-Thru Blade

The 2/2 Gbit Fibre Channel pass-thru blade, hereinafter referred to as FC pass-

thru blade, provides 10 ports for the bypass connection between FC daughter

boards (see manual for the relevant server blade type) and optical transceivers

for serial FC I/O and general-purpose I/O signals. The FC pass-thru blade

features 2 Gbit/sec Fibre Channel speed. It also provides LEDs for each FC port

to indicate the link status.

Figure 64: Fibre Channel pass-thru blade

The PRIMERGY BX600 S2 basic unit can be fitted with one or two FC pass-thru

blades. The slots for these blades are on the back of the system unit (NET 3 and

NET4 in figure 69 on page 117). If Fibre Channel functionality is to be available

for one or more server blades, at least one FC pass-thru blade or FC switch

blade must be installed. The assignment of the Fibre Channel channels is

described in section “Port Assignment of the FC Pass-Thru Blades” on

page 117.

FC pass-thru blade

SFP module

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 172 173

No comments

Fujitsu PRIMERGY BX600 S2 User Manual Page 113