Fujitsu iX500 User Manual download pdf (Page 10)

5. Open the ADF paper chute (cover) of the ScanSnap.

D The ScanSnap is powered on and the [Scan] button lights

in blue.

6. Check the ScanSnap Manager icon.

D The ScanSnap Manager icon is displayed in the menu that

appears when you click on the notification area, at the far

right of the taskbar.

To have the ScanSnap Manager icon always displayed on the

notification area, drag the icon and drop it onto the notification

area.

D The ScanSnap Manager icon appears in the Dock.

ATTENTION

zThe bottom of the ScanSnap may become hot when the

ScanSnap is used, but this heat does not affect operation

or cause any physical harm. However, be careful not to

drop the ScanSnap when carrying it.

zWhen the ScanSnap is turned on and left unused for 4

hours, it will turn itself off automatically. To turn the

ScanSnap back on, perform one of the following

operations:

- Press the [Scan] button (Scanning does not start).

- Close the ADF paper chute (cover) and open it again

The time until power-off can be changed. For details, refer to

the Operator's Guide.

HINT

When you close the ADF paper chute (cover), the

ScanSnap will turn off.

ATTENTION

If the ScanSnap Manager icon is , right-click on and select [To establish connection] from the

menu. You can reference the appropriate actions for connecting the scanner.

ATTENTION

If the ScanSnap Manager icon is , while holding down the [control] key, click and then select

[To establish connection] from the menu. You can reference the appropriate actions for connecting

the scanner.

[Scan] Button

ADF Paper Chute (cover)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Fujitsu iX500 User Manual Page 10