Fujitsu MHW2060AC User Manual Page 261
- Page / 278
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Glossary
Actuator
Head positioning assembly. The actuator consists of a voice coil motor and head
arm. If positions the read-write (R-W) head.
AT bus
A bus between the host CPU and adapter board
ATA (AT Attachment) standard
The ATA standard is for a PC AT interface regulated to establish compatibility
between products manufactured by different vendors. Interfaces based on this
standard are called ATA interfaces.
CHS addressing for drives
The CHS addressing collectively refers to the parameters defined by BIOS of the
host system, which, for example, include the number of cylinders, the number of
heads, and the number of sectors per track in the drive. The physical
specifications of the drive do not always correspond to these parameters.
The CHS addressing cannot make full use of the physical storage area of these
drives. To make the best use of these drives, the use of LBA addressing is
required.
Command
Commands are instructions to input data to and output data from a drive.
Commands are written in command registers.
Data block
A data block is the unit used to transfer data. A data block normally indicates a
single sector.
DE
Disk enclosure. The DE includes the disks, built-in spindle motor, actuator, heads,
and air filter. The DE is sealed to protect these components from dust.
Master (Device 0)
The master is the first drive that can operate on the AT bus. The master is daisy-
chained with the second drive which can operate in conformity with the ATA
standard.
C141-E258 GL-1
- MHW2060AC, MHW2040AC 1
- DISK DRIVES 1
- PRODUCT MANUAL 1
- FOR SAFE OPERATION 2
- Revision History 3
- Preface 5
- Operating Environment 6
- Conventions 6
- Attention 7
- Liability Exception 7
- Important Alert Items 9
- Manual Organization 11
- Contents 13
- Illustrations 19
- CHAPTER 1 Device Overview 23
- 1.1 Features 24
- 1.1.3 Interface 25
- 1.2 Device Specifications 26
- 1.3 Power Requirements 29
- 1.5 Acoustic Noise 33
- 1.6 Shock and Vibration 33
- 1.7 Reliability 34
- 1.8 Error Rate 35
- 1.9 Media Defects 35
- 1.10 Load/Unload Function 35
- 2.1 Device Configuration 40
- 2.2 System Configuration 41
- 2.2.3 2 drives connection 42
- 3.1 Dimensions 44
- 3.2 Mounting 45
- Connector 50
- 3.3.3 Device connection 51
- 3.4 Jumper Settings 52
- 3.4.4 CSEL setting 54
- 4.1 Outline 58
- 4.2 Subassemblies 58
- 4.3 Circuit Configuration 59
- C141-E258 4-5 61
- 4.4 Power-on Sequence 62
- 4.5 Self-calibration 63
- 4.6 Read/write Circuit 65
- 4.6.3 Read circuit 66
- 4.6.4 Digital PLL circuit 67
- 4.7 Servo Control 68
- Theory of Device Operation 72
- 4-16 C141-E258 72
- 4.7.3 Servo frame format 73
- 4.7.5 Spindle motor control 75
- CHAPTER 5 Interface 77
- 5.1 Physical Interface 78
- 5.2 Logical Interface 82
- 5.2.1 I/O registers 83
- 5.3 Host Commands 90
- 5.3.2 Command descriptions 94
- • Default function 110
- • Unload Feature: 110
- • Attribute ID 123
- • Raw attribute value 124
- • Status Flag 124
- • Current attribute value 124
- • Error logging capability 127
- • Check sum 127
- • SMART error logging 128
- • Command data structure 130
- • Error data structure 130
- • Status 130
- • SMART self-test 131
- • Self-test number 131
- • Self-test index 131
- • Test span 132
- • Current LBA under test 132
- • Current span under test 132
- • Feature Flags 133
- (CM) 1 1 1 0 0 1 0 0 149
- • SET MAX ADDRESS 180
- Password information 182
- • SET MAX SET PASSWORD 184
- • SET MAX LOCK 184
- • SET MAX UNLOCK 184
- • Description 186
- 5.3.3 Error posting 203
- Interface 204
- 5-128 C141-E258 204
- 5.4 Command Protocol 205
- (*) Transfers dummy data 207
- 5.4.4 Other commands 211
- 5.5 Ultra DMA Feature Set 213
- 5.5.2 Phases of operation 214
- 5.5.5 Ultra DMA CRC rules 223
- 5.6 Timing 225
- 5.6.4 Power-on and reset 240
- CHAPTER 6 Operations 241
- 6.1.1 Response to power-on 242
- 6.2 Power Save 247
- 6.3 Defect Processing 249
- Sector (physical) 250
- Cylinder 0 250
- (Not used) 250
- 779 780 251
- 6.4 Read-ahead Cache 252
- For MPU work For R/W command 252
- 8,388,608 bytes 252
- 6.4.2 Caching operation 253
- 256
- 6.5 Write Cache 258
- Glossary 261
- Acronyms and Abbreviations 265
- Comment Form 273
Related products and manuals for Hardware Fujitsu MHW2060AC
Hardware Fujitsu ADA-16FX User Manual
(17 pages)
(17 pages)
Hardware Fujitsu D1961 User Manual
(45 pages)
(45 pages)
Hardware Fujitsu MHT2060AT User Manual
(256 pages)
(256 pages)
Hardware Fujitsu MHZ2250BJ User Manual
(320 pages)
(320 pages)
Hardware Fujitsu MHV2120AT User Manual
(280 pages)
(280 pages)
Hardware Fujitsu SFP MSA User Manual
(1 pages)
(1 pages)
Hardware Fujitsu MHT2060BH User Manual
(264 pages)
(264 pages)
Hardware Fujitsu MB91460 SERIES FR60 User Manual
(103 pages)
(103 pages)
Hardware Fujitsu fi-5000N User Manual
(29 pages)
(29 pages)
Hardware Fujitsu Mainboard D1931 User Manual
(49 pages)
(49 pages)
Hardware Fujitsu C141-E280 User Manual
(12 pages)
(12 pages)
Hardware Fujitsu MPD3XXXAT User Manual
(191 pages)
(191 pages)
Hardware Fujitsu MB15F83UL User Manual
(6 pages)
(6 pages)
© 2020, manymanuals.com. All rights reserved. | 3.370 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals