Fujitsu MPB3052AT User Manual download pdf (Page 103)

C141-E045-02EN5 - 38

At command issuance (I/O registers setting contents)

1F7

(CM) 1 0 0 1 0 0 0 0

1F6

(DH)

× × ×

DV xx

1F5

(CH)

1F4

(CL)

1F3

(SN)

1F2

(SC)

1F1

(FR)

At command completion (I/O registers contents to be read)

1F7

(ST) Status information

1F6

(DH)

× × ×

DV xx

1F5

(CH)

1F4

(CL)

1F3

(SN)

1F2

(SC)

1F1

(ER)

(*1)

Diagnostic code

*1 This register indicates X‘00’ in the LBA mode.

(17) FORMAT TRACK (X'50')

Upon receipt of this command, the device sets the DRQ bit and waits the completion of 512-

byte format parameter transfer from the host system. After completion of transfer, the device

clears the DRQ bits, sets the BSY bit. However the device does not perform format operation,

but the drive clears the BYS bit and generates an interrupt soon. When the command

execution completes, the device clears the BSY bit and generates an interrupt.

The drive supports this command for keep the compatibility with previous drive only.

(18) READ LONG (X'22' or X'23')

This command operates similarly to the READ SECTOR(S) command except that the device

transfers the data in the requested sector and the ECC bytes to the host system. The ECC error

correction is not performed for this command. This command is used for checking ECC

function by combining with the WRITE LONG command.

Number of ECC bytes to be transferred is fixed to 4 bytes and cannot be changed by the SET

FEATURES command.

The READ LONG command supports only single sector operation.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 179 180

Comments to this Manuals

No comments

Fujitsu MPB3052AT User Manual Page 103

Comments to this Manuals

Related products and manuals for Hardware Fujitsu MPB3052AT