Fujitsu STYLISTIC ST4000P User Manual download pdf (Page 68)

Stylistic ST4000P Series Pen Tablet PC User’s Guide – Appendix

ABOUT IP ADDRESSES

Setting IP Addresses

If you are not sure how to set the IP address, refer to the

following procedure.

If you have an access point (DHCP server) on the

network, set the IP address as follows:

Windows 2000: [Obtain an IP address automatically]

Windows XP: [Obtain an IP address automatically]

If the IP address is already assigned to the computer in

the network, ask the network administrator to check the

IP address to be set for the computer.

If no access point is found in the network:

An IP address is expressed with four values in the range

between 1 and 255.

Set the each computer as follows: The value in paren-

theses is a subnet mask.

Computer A: 192.168.100.2 (255.255.255.0)

Computer B: 192.168.100.3 (255.255.255.0)

Computer C: 192.168.100.4 (255.255.255.0)

Computer X: 192.168.100.254 (255.255.255.0)

Problem Possible Cause Possible Solution

I want to remove

the driver

(Windows XP)

Windows XP:

When removing the driver, make sure that the device is attached to

the computer. If you try to remove the driver while the device is

detached from the computer, the driver is not removed.

1. Click [Start], right click [My Computer], and then click [Proper-

ties] from the menu that appears. [System Properties] appears.

2. Click the [Hardware] tab.

3. Click [Device Manager].

4. Click [+] beside [Network adapters].

5. Right click [Intersil PRISM Wireless LAN PCI Card], and

click [Uninstall] from the menu that is displayed. [Confirm

Device Removal] appears.

6. Click [OK].

7. Close [System Properties].

8. Make sure that the icon has disappeared from the task tray in

the lower right corner of the screen.

9. Click [Start] -> [Control Panel]. [Control Panel] appears.

10. Double-click [Add/Remove Programs]. [Add/Remove Pro-

grams] appears.

11. Perform the following steps.

■

Click [PRISM 11Mbps Wireless LAN for Windows].

■

Click [Change/Remove].

A window appears asking you if you really want to remove

the driver.

12. Click [Yes]. When the driver is removed, a window appears

showing that the driver has been removed.

13. Click [OK].

14. Close [Add/Remove Programs] and [Control Panel].

15. Shut down Windows, and turn off the computer.

POINT

A DHCP server is a server that automatically assigns IP

addresses to computers or other devices in the network.

There is no DHCP server for the AdHoc network.

Alb_UG.book Page 58 Friday, November 1, 2002 4:22 PM

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 74

Comments to this Manuals

No comments

Fujitsu STYLISTIC ST4000P User Manual Page 68

Comments to this Manuals

Related products and manuals for Infrared bulbs Fujitsu STYLISTIC ST4000P