Fujitsu LIFEBOOK N6400 User Manual download pdf (Page 52)

LifeBook N Series User’s Guide

3. While holding the clips out, remove the module

from the slot by lifting it up and pulling towards the

rear of your LifeBook notebook. (Figure 4-13)

Figure 4-13. Removing a Memory Upgrade Module

4. Store the memory upgrade module in a static

guarded sleeve.

5. Replace the cover by following steps 9 and 10 of

Installing a Memory Upgrade Module.

CHECKING THE MEMORY CAPACITY

Once you have changed the system memory capacity by

either adding or removing a memory upgrade module,

be sure to check that your notebook has recognized the

change.

You can check the memory capacity by clicking [Start]

-> Control Panel, then double-clicking the System icon.

Select the General tab and check the amount of memory

under “Computer.”

After installing your added memory

module, you must complete the Resetting

the Save-to-Disk Parameters procedure in

order for the Save-to-Disk mode to

operate properly on your LifeBook

notebook.

(See Hibernation (Save-to-

disk) Feature on page 32 for more

information)

If the total memory displayed is incorrect,

check that your memory upgrade module

is properly installed. (If the module is

properly installed and the capacity is still

not correctly recognized, see

Troubleshooting on page 51.

N6410-01.book Page 46 Tuesday, January 31, 2006 9:24 AM

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 111 112

No comments

Fujitsu LIFEBOOK N6400 User Manual Page 52