Fujitsu ST6012 User's Guide download pdf (Page 45)

- System States

Table 3. Changing System States

* Information in Table 3 is supplied to help you understand which system states your system can enter

from the current system state. Refer to the procedures on starting the system, shutting down the

system, suspending system operation, and resuming system operation given later in this chapter.

†

Your system may be configured to use either Sleep mode or Hibernate mode.

When you use your Tablet PC, you can change the current system state in a number of ways, depending

on the system’s current state. To determine the current system state, observe the Power icon in the Status

display. Table 3 on page 45 gives the different system states represented by the Power icon and describes

how you can change the system state from the current state.

Power icon

blinking

Sleep

†

To enter the On state, resume system operation by sliding the

Suspend/Resume switch.

To enter the Off state, resume system by sliding the Suspend/Resume

switch, then shut down your system.

Power icon not

displayed

Off State, or,

Hibernate

To enter the On state, start your system, or resume system operation by

sliding the Suspend/Resume switch.

Icon Appearance Current State

To Change State

ST6000.book Page 45 Monday, November 3, 2008 10:23 AM

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 131 132

No comments

Fujitsu ST6012 User's Guide Page 45