Fujitsu P7120D User Manual download pdf (Page 2)

LifeBook P7000 Notebook BIOS

LifeBook P Series

Notebook BIOS

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the

operating environment for your notebook. Your BIOS is

set at the factory for normal operating conditions,

therefore there is no need to set or change the BIOS

environment to operate your notebook.

The BIOS Setup Utility configures:

■

Device control feature parameters, such as changing

I/O addresses and boot devices.

■

System Data Security feature parameters, such

as passwords.

Entering the BIOS Setup Utility

To enter the BIOS Setup Utility do the following:

1. Turn on or restart your notebook.

2. Press the [

F2] key once the Fujitsu logo appears on

the screen. This will open the main menu of the

BIOS Setup Utility with the current settings

displayed.

3. Press the arrow keys to scroll through the other

setup menus to review or alter the current settings.

Navigating through the Setup Utility

The BIOS setup utility consists of six menus: Main,

Advanced, Security, Boot, Info and Exit. This document

explains each menu and all submenus and setup items.

The following procedures allow you to navigate the

setup utility menus:

1. To select a menu, use the cursor keys: [ ], [ ].

2. To select a field within a menu or a submenu, use the

cursor keys: [ ], [ ].

3. To select the different values for each field, press the

[

Spacebar] or [+] to change to the next higher selec-

tion and [F5] or [-] to go to the next lower selection.

4. To activate a submenu press

[Enter].

5. To return to a menu from a submenu, press [Esc].

6. To go to Exit menu from another menu, press [

Esc].

7. Pressing the [

F9] key resets all items in the BIOS to

the default values.

8. Pressing the [

F10] key saves the current configura-

tion and exits the BIOS Setup Utility. You will be

asked to verify this selection before it is executed.

9. Pressing the [

F1] key gives you a general help screen.

Entering the Setup Utility After a

Configuration Change or System Failure

If there has been a change in system configuration that

does not match the parameter settings stored in your

BIOS memory, or there is a failure in the system, the

system beeps and/or displays an error message after the

Power On Self Test (POST). If the failure is not severe, it

will give you the opportunity to modify the settings of

the setup utility, as described in the following steps:

1. When you turn on or restart the computer there is a

beep and/or the following message appears on the

screen:

Error message - please run SETUP

program Press <F1> key to continue,

<F2> to run SETUP

2. If an error message is displayed on the screen, and

you want to continue with the boot process and start

the operating system anyway, press the [

F1] key.

3. If an error message is displayed on the screen, and you

want to enter the setup utility, press the [

F2] key.

4. When the setup utility starts with a fault present, the

system displays the following message:

Warning!

Error message

[Continue]

5. Press any key to enter the setup utility. The system

will then display the Main Menu with current

parameters values.

• Selecting a field causes a help message

about that field to be displayed on the

right-hand side of the screen.

• Pressing [Enter] with the highlight on a

selection that is not a submenu or auto

selection will cause a list of all options

for that item to be displayed. Pressing

the Enter key again will select the high-

lighted choice.

If your settings require it, you may be

asked for a password before the operating

system will be loaded.

1 2 3 4 5 6 7 ... 24 25

Comments to this Manuals

No comments

Fujitsu P7120D User Manual Page 2

Comments to this Manuals

Related products and manuals for Motherboards Fujitsu P7120D