Fujitsu fi-4340C Instruction Manual download pdf (Page 40)

●

4-4

In this mode, the scanner waits for some predetermined time before issuing a “Paper Empty” message

after all documents are read. This predetermined time (time-out limit) is specified in the Setup mode.

Therefore, you can set the next documents on the ADF paper chute without interrupting the reading

operation.

The procedures for setting the manual feed mode are as follows:

1. Turn the power On and verify that “Scanner Ready” is displayed on the LCD.

Screen M1

2. Press then the scanner displays Screen M2.

Screen M2

3. Press then the scanner displays Screen M3

Screen M3

4. Press then the scanner displays Screen M4.

Screen M4

5. Select “Yes” by pressing . Then press .

6. Press to return to the “Scanner Ready” screen. Note that “Manual Feed” is shown on the LCD.

This means that the scanner is in Manual Feed mode.

Screen M1

Manual Feed Mode Setting

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 113 114

No comments

Fujitsu fi-4340C Instruction Manual Page 40