Fujitsu fi-4340C Instruction Manual download pdf (Page 77)

●

7-13

12 Select Interface

1. Press “Next” or “Previous” and let the scanner display Screen 29.

Screen 29

NOTICE

The Screen 29 will appear oniy when the scanner has proper interface boards or option boards in the

third party slot.

2. At Screen 29, press or to select the interface type. Press if you want to change the

setting.

NOTICE

1.Normally, this setting does not have to be changed.

2.When an appropriate board is installed in the third party slot of the scanner, the scanner

automatically turns off the SCSI interface, activating the board in the third party slot. Screen 54 can

be used to forcibly change the selected interface. The selected interface is then forcibly changed.

3.The SCSI interface and the board installed in the third party slot cannot be used at the same time.

4.The default is Auto.

3. Press to return.

13 Display the TPS Board ID Number

1. Press “Next” or “Previous” and let the scanner display Screen 30.

Screen 30

The scanner displays the ID number if the applicable board is installed.

NOTICE

If the Fujitsu video Interface Option board is installed properly, the display shows “ID=7”.

2. Press to return.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 113 114

No comments

Fujitsu fi-4340C Instruction Manual Page 77