FUJITSU SEMICONDUCTORSUPPORT SYSTEMSS01-26015-1EF2MC-8FX FamilyLQFP-52P (0.65 mm pitch) HEADER BOARDMB2146-261OPERATION MANUAL
76. Mounting Mass Production MCUs MountingTo mount a mass production MCU on the user system, use the supplied HQPACK (IC socket cover)(see “Figure 6
87. Product Specifications General specificationsTable 3 lists the general specifications of the header board.Table 3 General Specifications Main pa
9 MCU board I/F connector (CN1, CN2, and CN3) CN1 and CN2 are MCU board I/F connectors. CN3 is the incorrect insertion prevention socket of aMCU boar
10Table 6 Pin Assignment of the MCU Board I/F Connector CN2ConnectorPinNumberEvaluationMCU Pin NumberSignal nameConnectorPinNumberEvaluationMCU Pin Nu
11 User system I/F YQPACK (U1)The pin assignment of user system I/F YQPACK in the header board is shown in Table 7.Table 7 Pin Assignment of the User
SS01-26015-1EFUJITSU SEMICONDUCTOR • SUPPORT SYSTEMF2MC-8FX Family LQFP-52P (0.65 mm pitch) HEADER BOARDMB2146-261OPERATION MANUALApril 2006 the first
PREFACEThank you for purchasing the LQFP-52P (0.65 mm pitch) *1 header board (model number :MB2146-261) for the F2MC *2 -8FX family.MB2146-261 is a he
Copyright ©2006 FUJITSU LIMITED All rights reserved• The contents of this document are subject to change without notice.Customers are advised to consu
11. Product Outline Product outlineMB2146-261 is a header board (referred to as header board) used to connect the MCU board (modelnumber : MB2146-301
22. Checking the Delivered ProductBefore using the MB2146-261, confirm that the following components are included in the box:• LQFP-52P (0.65 mm pitch
34. Notes on Designing Notes on designing printed circuit board for the user systemWhen the header board is connected to the user system, some part m
4 MCU footprint design notesFigure 3 shows the recommended footprint dimensions of the NQPACK mounted on the printed cir-cuit board for the user syst
55. Connecting to the User System ConnectingMount the supplied NQPACK on the user system before using the MB2146-261. 1. To connect the header board
6Figure 5 Connecting MCU Board/Header Board to User System Disconnection1. Remove the MCU board from the header board. Detach the four corners slowly
Comments to this Manuals