Fujitsu V01 User Manual download pdf (Page 117)

Chapter 4 Troubleshooting

IP-900 Series

111

4.2 Alarm LED Goes On

This section explains corrective action to be taken if an alarm LED (ALM or INDWN) goes on.

The appropriate corrective action depends on the alarm code displayed. See the table below for this

information.

Note: For information on how to check the alarm log, see Section 3.2.10 "Log" in this document.

Table 4-2 Alarm Codes and Corrective Action

Code Corrective action

Lxxx Check the network and partner device. If an error cannot be identified, contact your system

administrator.

Exxx Turn off the device and then turn it on again. If the device is still operating abnormally after being

powered on again, contact your maintenance personnel. Then, he/she may ask the alarm code.

Ixxx This indicates a loss of video input. Check the video output device and video cable connected to the

video input terminal.

xxx: Indicates three alphanumeric characters. See Table 4-3, "Alarm Code List," for details.

4.2

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 137 138

No comments

Fujitsu V01 User Manual Page 117