Fujitsu V01 User Manual download pdf (Page 28)

Chapter 3 Web Operation

IP-900 Series

3.2 Common Menu

3.2.1 Configuration Data

In the IP-900 series terminology, the set of parameters required for operation is called "configuration

data." IP-900 series has a data storage area in which up to 10 sets of configuration data can be stored.

By storing up to 10 sets of configuration data in advance in the storage area, it can be used by

switching with ease between these sets of configuration data.

For instance, it is useful in switching between encoder and decoder, changing resolution or bit rates

or switching the network interfaces including PPPoE, DHCP, static IP, etc.

To easily register these 10 sets of configuration data, you can use the procedures explained in Section

3.2.2, "Selecting Configuration Data," and Section 3.2.3, "Copying Configuration Data."

Table 3-1 Parameters Preprogrammed in Configuration Data lists the parameters, of which 10

sets can be stored independently as configuration data. For detail information on the individual

parameters, see the respective sections shown in the reference column in the table below.

Table 3-1 Parameters Preprogrammed in Configuration Data

Category Window Name Group Name Reference

COMMON BASIC Ethernet common setting 3.2.4 Basic

IPv4 network settings

IPv6 network settings

Other settings

Time zone setting TIME ZONE &

TIME SERVER

Time server settings

3.2.5 Time Zone & Time Server

DATA PORT Operation settings 3.2.6 Data Port

Port number settings

RS-232C settings

SNMP Operation settings 3.2.7 SNMP

ENCODER SETTINGS AV input settings (Video) 3.3.1 Setting (Encoder)

AV input settings (Audio)

Output interface settings

(Main encoder ethernet)

Output interface settings

(Main encoder ethernet port)

Output interface settings

(Sub encoder ethernet)

Output interface settings

(Sub encoder ethernet port)

Main encoder settings

(Encode)

Sub encoder settings

(Encode)

3.2

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 137 138

Comments to this Manuals

No comments

Fujitsu V01 User Manual Page 28

Comments to this Manuals