Fujitsu B6220 User Manual download pdf (Page 107)

WIreless LAN User’s Guide

Troubleshooting the WLAN

TROUBLESHOOTING TABLE

Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the

following table.

Problem Possible Cause Possible Solution

Unavailable

network

connection

Incorrect network

name (SSID) or

network key

Ad hoc connection: verify that the network names (SSID’s) and network

keys (WEP) of all computers to be connected have been configured

correctly. SSID’s and WEP key values must be identical on each machine.

Access Point (Infrastructure) connection: set the network name (SSID) and

network key to the same values as those of the access point.

Set the Network Authentication value identically to that of the Access Point.

Please consult your network administrator for this value, if necessary.

Weak received signal

strength and/or link

quality

Ad hoc connection: Retry connection after shortening the distance to the

destination computer or removing any obstacles for better sight.

Access Point (Infrastructure) connection: Retry connection after shortening

the distance to the access point or removing any obstacles for better sight.

To check the wave condition, refer to the following page:· “Confirming the

status of the radio” on page 97.

The WLAN device

has been deactivated

or disabled

Check if the wireless switch is turned ON. Also verify “Disable Radio” is not

checked in “Network setting” window.

The computer to be

connected is turned

off

Check if the computer to be connected is turned ON.

RF interference from

Access Points or

other wireless

networks

The use of identical or overlapping RF channels can cause interference with

the operation of the WLAN device. Change the channel of your Access Point

to a channel that does not overlap with the interfering device.

Wireless network

authentication has

failed

Re-check your Network Authentication, Encryption, and Security settings.

Incorrectly configured security settings such as an incorrectly typed WEP

key, a misconfigured LEAP username, or an incorrectly chosen authentica-

tion method will cause the LAN device to associate but not authenticate to

the wireless network.

Incorrectly

configured network

settings

Recheck the configuration of your network settings.

For the method of checking, refer to the following page:·“Connection to the

Network” on page 95.

Incorrect IP address

configuration

This only applies to networks using static IP addresses. Please contact your

network administrator for the correct settings.

B Series.book Page 99 Thursday, May 17, 2007 2:25 PM

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 127 128

Comments to this Manuals

No comments

Fujitsu B6220 User Manual Page 107

Comments to this Manuals

Related products and manuals for Laptops Fujitsu B6220