Fujitsu C1410 User Manual download pdf (Page 98)

LifeBook C1400 Series Notebook - Appendix

Configuration of the WLAN Device

The WLAN device can be configured to establish wire-

less network connectivity using the Intel PROSet for

Wireless utility. The Intel PROSet for Wireless utility

allows for multiple profile setup and supports automatic

profile switching. Support for most industry standard

security solutions is contained in this software.

FLOW OF OPERATIONS

1. Activate the WLAN Device (See Activating the

WLAN Device on page 87 for more information).

2. Configure the Wireless Network parameters (See

Configuration Using Intel PROSet for Wireless

Utility, below).

■

Enter the network name (SSID)

■

Choose the appropriate WLAN architecture (Ad

Hoc or Infrastructure)

■

Choose Authentication method: Open, Shared,

WPA-Enterprise, WPA2-Enterprise, WPA-

Personal, or WPA2-Personal.

■

If using static WEP keys, enter static WEP key and

choose key index.

3. Configure network settings

■

TCP/IP settings

■

Workgroup or Domain settings.

CONFIGURATION USING

INTEL PROSET FOR WIRELESS UTILITY

This section explains the procedure to properly

configure the WLAN device using the Intel PROSet for

Wireless utility. Pre-defined parameters will be required

for this procedure. Please consult with your network

administrator for these parameters:

Network Name - Also known as the SSID

Network Key (WEP) - Required if using static WEP

keys.

Authentication Type - Open, Shared, WPA, WPA-PSK

Procedure

1. Activate the WLAN device using either the Wireless

On/Off Switch or the Intel PROSet for Wireless

utility.

2. Click the [Start] button first and then [All Pro-

grams].

3. Click the icon [Intel PROSet Wireless] to execute

the Intel PROSet for Wireless utility.

4. Click the [Add] button. The General Settings dialog

displays.

5. Enter a profile name in the Profile Name field.

6. Enter the network SSID, in the Network Name

(SSID) field.

7. Click Infrastructure or Ad Hoc for the operating

mode.

8. Click [Advanced].

9. The Mandatory Access Point option is only used if

Infrastructure mode is selected. Use this option to

connect to a specific access point. Enter the MAC

address for the access point. Click OK to save the

setting and return to the General Settings page.

10. Click [Next].

11. If you wish to enable Cisco Compatible Extensions,

click Cisco Options and check the “Enable Cisco

Compatible Extensions” box.

12. To enable LEAP support, check the 802.1x option

and choose LEAP from the pull down list.

13. Click [OK].

14. Click Next.

15. Select Open, Shared, WPA-Enterprise, WPA2-

Enterprise, WPA-Personal, or WPA2-Personal in

the Network Authentication options.

16. Select either None, WEP, CKIP, or TKIP for the

data encryption.

17. If WEP is selected, select either 64 or 128-bit for the

Encryption Level.

18. Select the appropriate key index for your WLAN.

The key index must be identical to the WEP key

index used by the Access Point.

19. Enter the WEP key if required. If your network does

not employ a 802.1x/EAP security mechanism,

please skip to step 24.

20. Click the Enable 802.1x checkbox to enable the

802.1x security option. Please contact your network

administrator if configuration of this setting is

required.

21. Select the appropriate Authentication Type. Please

contact your network administrator if configura-

tion of this setting is required.

22. After selecting authentication type, enter the name,

domain, and password of the user you have created

on the authentication server. The user name and

clio.book Page 88 Friday, June 2, 2006 10:37 AM

1 ... 97 98 99 ... 112

Comments to this Manuals

No comments

Fujitsu C1410 User Manual Page 98

Comments to this Manuals

Related products and manuals for Laptops Fujitsu C1410