Fujitsu LifeBook A3210 User Manual download pdf (Page 76)

- Memory Upgrade Module

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,

be sure to check that your notebook has recognized the change.

Check the memory capacity by clicking [Start] -> Control Panel -> System and Maintenance -> System.

The amount of memory is displayed next to “Memory - RAM:”

Removing a Memory Upgrade Module

1 Perform steps 1 through 4 of Installing a Memory

Upgrade Module.

2 Pull the clips sideways away from each side of the

memory upgrade module at the same time.

3 While holding the clips out, remove the module from the

slot by lifting it up and pulling it away from your notebook.

4 Store the memory upgrade module in a static guarded

sleeve.

5 Replace the cover and reinstall the screws.

Figure 29. Removing memory module

IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS

PROPERLY INSTALLED. (IF THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT

CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 78.

Memory Clips

1 ... 75 76 77 ... 183

No comments

Fujitsu LifeBook A3210 User Manual Page 76