Fujitsu LifeBook N6420 User Manual download pdf (Page 101)

WIreless LAN User’s Guide

14. Click Next.

15. Select Open, Shared, WPA-Enterprise, WPA2-

Enterprise, WPA-Personal, or WPA2-Personal in

the Network Authentication options.

16. Select either None, WEP, CKIP, or TKIP for the

data encryption.

17. If WEP is selected, select either 64 or 128-bit for the

Encryption Level.

18. Select the appropriate key index for your WLAN.

The key index must be identical to the WEP key

index used by the Access Point.

19. Enter the WEP key if required. If your network does

not employ a 802.1x/EAP security mechanism,

please skip to step 24.

20. Click the Enable 802.1x checkbox to enable the

802.1x security option. Please contact your network

administrator if configuration of this setting is

required.

21. Select the appropriate Authentication Type. Please

contact your network administrator if configura-

tion of this setting is required.

22. After selecting authentication type, enter the name,

domain, and password of the user you have created

on the authentication server. The user name and

password do not have to be the same as name and

password of your current Windows user login.

23. Click [OK] to save the settings.

24. From the Intel ProSet Wireless page, click the new

profile name shown in the Profile List. Use the up

and down arrows to position the priority of the

new profile in the priority list.

25. Click the Connect button to connect to the net-

work.

Click [Close] if you want to close the Intel(R) PROSet

for Wireless window.

CONNECTION TO THE NETWORK

This section explains connection to the network.

If there is an administrator of the network, contact the

network administrator for data settings.

Setting the network

Perform the “Setting TCP/IP” and “Confirming the

computer and work group names” operations required for

network connection.

Setting TCP/IP

1. Click the [Start] button first and then [Control

Panel].

2. If the Control Panel is in Category view, switch to

Classic view by clicking “Switch to Classic View”

under Control Panel the left frame. (If you are

already in Classic view, “Switch to Category View”

will be displayed.)

3. Double-click [Network Connections]. A list of cur-

rently installed networks will be displayed.

4. Right-click [Wireless Network Connection] in the

list, and then click [Properties] in the menu dis-

played. The [Wireless Network Connection Proper-

ties] window will be displayed.

5. Click the [General] tab if it is not already selected.

6. Click [Internet Protocol (TCP/IP] and then click

[Properties]. The [Internet Protocol (TCP/IP)

Properties] window will be displayed.

7. Set the IP address as follows:

■

For ad hoc connection: Select [Use the following

IP address:] and then enter data for [IP address]

and [Subnet mask]. See page 100 for IP address

setting.

■

For access point (infrastructure) connection: If

your network uses DHCP, select [Obtain an IP

address automatically] and [Obtain DNS server

address automatically]. If your network uses static

IP addresses, consult with your network adminis-

trator for the correct IP address settings.

8. Click the [OK] button. Processing will return to the

[Wireless Network Connection Properties] window.

9. Click the [OK] button.

10. Close the [Network Connection] window.

Following this operation, confirm the names of the

computer and the workgroup as follows.

Confirming the computer and work group names

1. Click the [Start] button, then [Control Panel].

To change the setting of the IP address,

you need to be logged in from Windows

as an administrator.

To modify the computer name and/or the

work group name, you need to be logged

in from Windows as an administrator.

N6420-Vista.book Page 93 Friday, February 16, 2007 4:48 PM

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 127 128

Comments to this Manuals

No comments

Fujitsu LifeBook N6420 User Manual Page 101

Comments to this Manuals

Related products and manuals for Laptops Fujitsu LifeBook N6420