Fujitsu VFY:T2004SH030DE?GARANTIE Datasheet Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
DATASHEET FUJITSU PRIMERGY TX200 S4 SERVER
Page 3 / 8 http://ts.fujitsu.com/Primergy
TECHNICAL DETAILS
PRIMERGY TX200 S4
Housing type Tower Tower Tower Tower Rack Rack Rack Rack
Hard disk architecture 3.5” SAS/
SATA
3.5” SAS/
SATA
2.5” SAS 2.5” SAS 3.5” SAS/
SATA
3.5” SAS/
SATA
2.5” SAS 2.5” SAS
MAINBOARD
Mainboard type D 2509
Chipset Intel
®
5000Z
PROCESSOR Intel
®
Xeon
®
processor E5205
(2C, 1.86 GHz, SLC: 6 MB (1066 MHz, 65 W)
Intel
®
Xeon
®
processor E5405
(4C, 2.00 GHz, SLC: 2 x 6 MB (1333 MHz, 80 W)
Intel
®
Xeon
®
processor E5420
(4C, 2.50 GHz, SLC: 2 x 6 MB (1333 MHz, 80 W)
Intel
®
Xeon
®
processor E5430
(4C, 2.66 GHz, SLC: 2 x 6 MB (1333 MHz, 80 W)
Intel
®
Xeon
®
processor L5410
(4C, 2.33 GHz, SLC: 2 x 6 MB (1333 MHz, 50 W)
Intel
®
Xeon
®
processor L5420
(4C, 2.50 GHz, SLC: 2 x 6 MB (1333 MHz, 50 W)
Memory slots 6 (3 Banks with 2 slots each)
Memory slot type PC2-5300F (Fully buffered DIMM DDR2 667 ECC)
Memory capacity (min. - max.) 1 GB - 24 GB
Memory protection Advanced ECC
SDDC (Chipkill™)
Memory Scrubbing
Hot-spare memory support
MEMORY OPTIONS 8 GB (2 module(s) 4 GB) DDR2, fully buffered, 667 MHz, PC2-5300F, DIMM
4 GB (2 module(s) 2 GB) DDR2, fully buffered, 667 MHz, PC2-5300F, DIMM
2 GB (2 module(s) 1 GB) DDR2, fully buffered, 667 MHz, PC2-5300F, DIMM
INTERFACES
USB ports 5 x USB 2.0 (1x front, 2x rear, 2x internal)
Graphics (15-pin) 1 x VGA
Serial 1 (9-pin) 1 x serial RS-232-C, usable for iRMC S2 or system or shared
Serial 2 (9-pin) 1 x serial RS-232-C
Parallel (25-pin) 1 x Centronics 25-pin EPP/ECP compatible (option)
Mouse / Keyboard (PS/2) 2
LAN / Ethernet (RJ-45) 1 x Gbit/s Ethernet
Service LAN (RJ45) 1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s)
Service LAN trafc can be switched to shared onboard Gbit LAN port
ONBOARD OR INTEGRATED CONTROLLER
RAID Controller Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (option, occupies one PCIe slot).
See under Components RAID controller
SATA Controller 6311ESB, 6-port SATA (4x internal HDDs in SATA base units with RAID 0/1/10 and 2x for accessible drives)
SATA Controller type notes optional RAID 5 (iButton key)
SATA SW RAID support for Windows and Linux OS only
LAN Controller BCM 5708, 10/100/1000 Mbit/s Ethernet, TCP/IP acceleration, PXE-Boot via LAN
from PXE server, iSCSI Boot (also diskless)
via onboard LAN
Page view 2
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments