Fujitsu 2300 User Manual download pdf (Page 24)

Starting the Pen Tablet

2-3

Starting the Pen Tablet 2

Follow the procedure below to start the Stylistic 2300 pen tablet. Before you begin,

confirm that the system is in the Off state. To do so, observe the Status display. If the

Power icon is not visible in the Status display, the system is in the Off state and it is

safe to perform this procedure. If the Power icon is visible (either blinking or on

continuously), do not perform this procedure. See “System States” earlier in this

chapter for details on operational modes represented by the Power icon.

1. Press the Suspend/Resume button to start the system.

2. Ensure that the battery pack in your pen tablet is sufficiently charged, or connect

an external power source such as the AC adapter or auto adapter to your pen

tablet. See “Status Display” in Chapter 1 to determine the percentage of charge

represented by the Battery Gauge icon in the Status display.

After performing system initialization, the system starts the operating system

installed on the hard disk drive. Once the operating system is running, you can use

the system.

Caution

The Suspend/Resume button can be configured to either

suspend and resume the system or to turn the system on and

off. Under most circumstances, the Suspend/Resume button

will be used to suspend and resume the system. If it is set up

as an On/Off button, be sure to save your data before you

press it -- turning off the system this way will result in the loss

of active data.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 54 55

No comments

Fujitsu 2300 User Manual Page 24