Fujitsu 2300 User Manual download pdf (Page 25)

2-4

Using the Stylistic 2300 Pen Tablet

Shutting Down the System 2

Follow these steps to shut down and turn off your system:

1. If system operation has been suspended, resume system operation. See

“Resuming System Operation” later in this chapter for details.

2. Save your work and close all running programs.

3. Choose Shut Down from the Windows (95, 98, or NT) Start menu and carry out

the Shut Down command.

The system is now in the Off state.

Suspending System Operation 2

The Stylistic 2300 pen tablet allows you to suspend the system operation without

closing programs or exiting the operating system. Use this feature to conserve battery

power when a system shutdown is inconvenient or when the battery needs to be

changed.

To suspend system operation:

1. Press the Suspend/Resume button, or carry out the Suspend command from your

operating system or power management program. (If your system is configured

to suspend operation using Suspend-to-Disk mode, which is explained later in

this procedure, a message is displayed while data is saved to your hard disk.)

Caution

The Suspend/Resume button can be programmed to act as an On/Off switch.

When it is configured as an On/Off switch, pressing the Suspend/Resume

button causes all active data to be lost. If the system is not shut down properly

before pressing the On/Off-configured button, a disk checking program may

automatically run the next time you turn on the system. If it encounters any

disk problems, you may be required to connect a keyboard in order to re-start

the system.

Caution

If you are replacing the battery pack,

wait until system operation is

suspended and the power icon is flashing

before you remove the battery

pack. Failure to do so could result in loss of your unsaved data.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

No comments

Fujitsu 2300 User Manual Page 25