Fujitsu LifeBook T904 Operations Manual Page 68

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 67
Security functions
Password prote ction for the hard disk
Passwordprotect ion:
The had disk password prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
Call up the BIOS Setup and select the Security menu .
If you have not assigned BIO S passwords yet, dene the supervisor and the user
password now, if desired (see "
Securit y functions", Page 59).
Mark the H ard Disk Security eld and press the Enter key.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
Enter new Password then appears and you are asked to enter a passwo rd.
Ente r the password and press the Enter key.
Conrm new Password requires y ou to conrm the password.
Enter the pa ssword again and press the Enter key.
Setup Notice: Changes have been saved is displayed to conrm that the
new password has been saved.
To assign the password for the second hard disk (Drive1), go to the Drive1 area and
select the eld Set Master P assw o rd, then proceed in exactly the same way as f or
setting up the password for the rst hard disk (Drive0).
The eld Password Entry on Boot is set to Enabled by default. You c an exit the BIOS
Setup once you have nished changing the settings.
From the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Ye s .
The notebook reboots and your hard disk is now protected with a password. T he system
will ask you to enter the password when the noteb ook is restarted again.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
Call up the BIOS Setup and select the Security menu .
Mark the H ard Disk Security eld and press the Enter key.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password pro m pt.
Afte r entering the passw ord, press the Enter key three times.
From the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Ye s .
The notebook reboots, and password protection for the hard disk is cancelled.
To cancel the password for the secon d hard disk (Drive1), go to the Drive1 area
and select the eld Set Master Password, then proceed in exactly the same way as
for cancelling the password for the rst hard disk (Drive0).
64 Fujitsu
Page view 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 107 108

Comments to this Manuals

No comments