Getting Started 5000NP3PC-1122-04ENGetting Started5000N
2ATTENTIONThe Administrator's PIN (Personal Identification Number) is necessary to configure the settings which require the Administrator rights.
fi-5000N Getting Started 3Chapter 2 INSTALLING THE fi-5000NThe scanning test written in section "2.7 Scan Test", is explained using the FU
42.3 fi-5000N's Network Settings Network Connection 1. Turn on the power of the scanner and fi-5000N.Refer to the scanner product manual for de
fi-5000N Getting Started 53. Enter the Administrator PIN (the default setting is "5000"), and press the [ENT] key.4. Select "Configure
6 If the contents are correct, press the [ENT] key. The following screen appears.The network settings are completed.2.4 Installing the DriverIn order
fi-5000N Getting Started 7 Installing the FUJITSU TWAIN32 Scanner Driver 1. Turn on the power of the PC, and log on to Windows.2. Insert the Setup C
8Installation of the FUJITSU TWAIN 32 scanner driver is completed. Installing ScandAll 21"Scandall 21" is an image capturing software that
fi-5000N Getting Started 9For FUJITSU ISIS Scanner Driver PreparationPrepare the Setup CD-ROM. Installing the FUJITSU ISIS Scanner Driver1. Turn o
102.5 Installing and Setting the fi-5000N Software Installing fi-5000N SoftwareWith the following the procedure, install the fi-5000N Software on:•Th
fi-5000N Getting Started 11 Registering UsersThe Administrator can register users on the fi-5000N by using the fi-5000N Software installed on the Ad
12Configuring Scanning Application Select a scanner and configure the scan settings with the scanning application.(As an example here, ScandAll 21 is
fi-5000N Getting Started 132.6 Registering FingerprintsFor user authentication, register each user’s fingerprint information on this product. However
147. Remove your finger from the fingerprint sensor.The following screen appears, and the fingerprint verifications will be repeated twice. 8. For ve
fi-5000N Getting Started 152. If the capturing of your fingerprint is successfully done, a buzzer sounds and at the same time the following screen ap
AP-1Appendix1 TroubleshootingBefore you ask for repair service, check the following first.Check also the fi-5000N Message Display if any error descrip
fi-5000N Getting Started AP-2Scanning does not start when the [Scan] or [Send to] button is pressed.Is the scanner showing an error code? (Does "
AP-3Appendix 2 Daily Care Cleaning Materials * For details about the cleaner F1, contact the FUJITSU dealer where you purchased the fi-5000N. Parts
fi-5000N Getting Started AP-4Appendix 3Using User Authentication By Fingerprint How to place your finger on the sensorPay attention to the following
AP-5 Caution on fingerprint sensor usage• Discharge static electricity from your finger by touching a metallic object before placing your finger on t
z Copying of the contents of this manual in whole or in part is forbid-den under the copyright law.z The contents of this manual are subject to change
fi-5000N Getting Started iCONTENTS Regulatory Information ... ii Note, Liability ...
iiINTRODUCTIONThank you for purchasing the fi-5000N. This document describes the installation and basic oper-ation methods of the fi-5000N. Before usi
fi-5000N Getting Started iii Note, LiabilityBEFORE USING THIS PRODUCT, PLEASE READ THIS MANUAL CAREFULLY. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEX
ivTrademarksMicrosoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. ISIS and QuickScan a
fi-5000N Getting Started vScreen Examples In This ManualThe screen examples in this manual are subject to change without notice in the interest of pro
viDo not use the device if you smell a strange odor.Do not install the device on unstable surfaces.Do not place heavy objects or stand on top of the d
fi-5000N Getting Started 1Chapter 1 PREPARING THE DEVICE1.1 Checking the Contents of the Device PackageWhen you open the package containing the fi-500
Comments to this Manuals