Fujitsu MBA3073NP User Manual download pdf (Page 27)

Table 2.2 Function specifications (continued)

Specification

Item

MBA3300NC

MBA3300NP

MBA3147NC

MBA3147NP

MBA3073NC

MBA3073NP

SPI-4 (T10/1365D Rev. 10), SAM-2 (T10/1157D Rev. 24),

Related standards

SPC-2 (T10/1236D Rev. 20), SBC (T10/996D Rev. 8c)

Data buffer 8 MB FIFO ring buffer (*12)

Acoustic noise (Idle) 3.6 Bels typ.

(*1) The formatted capacity can be changed by changing the logical block length and using spare sector

space. See Chapter 3 for the further information. The formatted capacity listed in the table is an

estimate for 512 bytes per sector.

(*2) One gigabyte (GB) = one billion bytes; accessible capacity will be less and actual capacity

depends on the operating environment and formatting.

(*3) The seek time is as follows:

Seek time [ms]

Seek difference [4096 Cyl/div]

(*4) The start time is the time from power on or start command to when the HDD is ready, and the stop

time is the time for disks to completely stop from power off or stop command.

(*5) This value indicates during idle mode. Power supply at nominal voltage ± 1%. 25°C ambient.

(*6) Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.

(*7) 5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m.

(*8) 1 on 1 connection case.

(*9) 1 host, 15 devices case.

C141-E270 23

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 137 138

No comments

Fujitsu MBA3073NP User Manual Page 27