Fujitsu P1620 User Manual download pdf (Page 2)

LifeBook P1600 Notebook BIOS

LifeBook P Series Notebook BIOS

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the

operating environment for your notebook. Your BIOS is

set at the factory for normal operating conditions,

therefore there is no need to set or change the BIOS

environment to operate your notebook.

The BIOS Setup Utility configures:

■

Device control feature parameters, such as changing

I/O addresses and boot devices.

■

System Data Security feature parameters, such

as passwords.

Entering the BIOS Setup Utility

To enter the BIOS Setup Utility, do the following (or use

the TrustedCore Menu, as detailed in the next section):

1. Turn on or restart your notebook.

2. Press [F2] once the Fujitsu logo appears on the

screen. This will open the main menu of the BIOS

Setup Utility with the current settings displayed.

3. Press the [RIGHT ARROW] or [LEFT ARROW] key

to scroll through the other setup menus to review or

alter the current settings.

Using the TrustedCore Menu

When the Fujitsu logo appears on the screen. press the

[Enter] key or click on the left mouse or touchpad

button; the TrustedCore Menu will appear.

The TrustedCore Menu provides shortcuts to the

following menus and information screens:

■

BIOS Setup

■

Diagnostic Screen

■

Boot Menu

■

Patent Information

■

System Information

■

Continue Booting

Clicking on any of the fields will invoke the screen,

information, or action described.

The Boot Menu can also be invoked by pressing the

[F12] key when the Fujitsu logo appears on the screen.

Navigating through the Setup Utility

The BIOS setup utility consists of six menus: Main,

Advanced, Security, Boot, Info and Exit. This document

explains each menu and all submenus and setup items.

The following procedures allow you to navigate the

setup utility menus:

1. To select a menu, use the cursor keys: [ ], [ ].

2. To select a field within a menu or a submenu, use the

cursor keys: [ ], [ ].

3. To select the different values for each field, press the

[

Spacebar] or [+] to change to the next higher selec-

tion and [

F5] or [-] to go to the next lower selection.

4. To activate a submenu press [Enter].

5. To return to a menu from a submenu, press [

Esc].

6. To go to Exit menu from another menu, press [

Esc].

7. Pressing the [F9] key resets all items in the BIOS to

the default values.

8. Pressing the [

F10] key saves the current configura-

tion and exits the BIOS Setup Utility. You will be

asked to verify this selection before it is executed.

9. Pressing the [

F1] key gives you a general help screen.

Entering the Setup Utility After a

Configuration Change or System Failure

If there has been a change in system configuration that

does not match the parameter settings stored in your

BIOS memory, or there is a failure in the system, the

system beeps and/or displays an error message after the

Power On Self Test (POST). If the failure is not severe, it

will give you the opportunity to modify the settings of

the setup utility, as described in the following steps:

• Selecting a field causes a help message

about that field to be displayed on the

right-hand side of the screen.

• Pressing [Enter] with the highlight on a

selection that is not a submenu or auto

selection will cause a list of all options

for that item to be displayed. Pressing

the Enter key again will select the high-

lighted choice.

1 2 3 ... 26

Comments to this Manuals

No comments

Fujitsu P1620 User Manual Page 2

Comments to this Manuals

Related products and manuals for Laptops Fujitsu P1620