Fujitsu S6510 User Manual download pdf (Page 48)

- LifeBook Security/Application Panel

From Suspend State

1 Press your Power/Suspend/Resume button.

2 When the Security Indicator flashes, enter the password and press [Enter] button.

3 The notebook should resume normal operation.

Incorrect Password Entry

If an invalid supervisor or user password is entered three times in succession, the system will “beep” for

about one minute. If a valid password is entered within a minute (while system beeps), the beeping will

stop and the notebook will resume normal operation. If no password (or an invalid one) is entered while

the system beeps, the system will return to its previous locked state (suspend or off) and the Security

Indicator will go off. To reactivate the notebook after a password failure, you must press the

Power/Suspend/Resume button, then enter a correct password.

Precautions

Opening and Closing the Cover

Closing the cover automatically places the notebook into suspend mode. Opening the cover does not

automatically place the notebook into normal operation. Instead, you must enter the proper security

password after pushing the Power/Suspend/Resume button. This setting can be changed in the Power

Options Control Panel.

Low Battery Operations

If your LifeBook notebook has low battery, pushing the Power/Suspend/Resume button only turns on the

Security Indicator. Your notebook does not unlock, the Security Indicator turns off after one minute. To

resume normal operation, first attach a power supply to the notebook. Then you may unlock the notebook.

REMEMBER THE USER PASSWORD YOU SPECIFIED ON THE SECURITY PANEL APPLICATION. IF YOU

FORGET THE PASSWORD YOU WILL NOT BE ABLE TO USE YOUR COMPUTER. THE SUPERVISOR

PASSWORD CAN OVERRIDE THE USER PASSWORD.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 202 203

No comments

Fujitsu S6510 User Manual Page 48