Fujitsu Network Scanner fi-6010N User Manual download pdf (Page 16)

Appendix C Replacing Parts

■ Part No. and Replacement Cycle

for Consumable Parts

The usage count of consumable parts can be checked in

the "Usage Status" screen on the [Device Status] tab.

When parts need to be replaced soon, the "Status" infor-

mation field becomes orange. When parts need to be

replaced immediately, the "Status" information field

becomes red.

The following table specifies the replacement part num-

bers and the standard replacement cycles.

To obtain these parts, contact your FUJITSU dealer or

an authorized FUJITSU scanner service provider.

These replacement cycles are rough guidelines when

using 64 g/m

(17 lb) A4/Letter woodfree or wood con-

taining paper. They may vary according to the type of

documents scanned, scanner usage, and cleaning fre-

quency.

The following diagram shows the locations of the con-

sumable parts in the scanner. For more details, refer to

the "Operator's Guide".

■ Pad Assembly (PAD ASSY)

■ Pick Roller

The glass scanner windows

inside the ADF can become hot

when the scanner is used.

Before cleaning inside the

scanner or replacing any parts,

turn off the power, unplug the AC

adapter from the outlet, and wait

for at least 15 minutes.

Part Name Replacement Cycle

Pad assembly

(Pad ASSY)

(PA03289-0111)

After every 50,000 sheets

scanned or once a year

Pick roller

(PA03289-0001)

After every 100,000 sheets

scanned or once a year

ATTENTION

Use only the PFU LIMITED parts

specified. Do not use consumable

parts made by other manufacturers.

Pick roller

Pick roller's shaft

fi-6010N Network Scanner Getting Started

■ Part No. and Replacement Cycle

for Carrier Sheet

One "Carrier Sheet" is provided with the scanner. If the

"Carrier Sheet" provided with the scanner can no longer

be used for scanning due to damage or wear-and-tear,

you can purchase a new Carrier Sheet separately.

The following table specifies the replacement number

and the standard replacement cycle for carrier sheets.

Contact your FUJITSU scanner dealer or an authorized

FUJITSU scanner service provider to obtain these prod-

ucts.

This replacement cycle is a rough guideline. This may

vary according to the type of documents scanned, scan-

ner usage, and cleaning frequency. If parts become

noticeably dirty, replace them accordingly.

The following diagram shows the Carrier Sheet.

For more details, refer to the "Operator's Guide".

■ Carrier Sheet

Part Name

No. of

items

Replacement Cycle

Carrier Sheet

(PA03360-0013)

5 After used for 500

scans

ATTENTION

Use only the PFU LIMITED parts

specified. Do not use parts made by

other manufacturers.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Fujitsu Network Scanner fi-6010N User Manual Page 16

Comments to this Manuals

Related products and manuals for Scanners Fujitsu Network Scanner fi-6010N