Fujitsu LifeBook E8110 User Manual download pdf (Page 53)

User Installable Features

INSERTING EXPRESSCARDS

There are two different width ExpressCards: 34 mm and

54 mm. The connector inside the slot is located on the

left-hand side of the slot. If you insert a 34 mm card, be

sure to align it with the left side of the slot when

inserting it.

ExpressCards are inserted in the ExpressCard slot (the

top slot). (Figure 4-7).

Figure 4-7. Inserting/Removing ExpressCards

See your ExpressCard manual for instructions on the

insertion of your card. Some cards may require that your

notebook is off while inserting them.

To insert an ExpressCard, follow these steps:

1. Make sure there is no ExpressCard currently in the

slot. If there is, see Removing ExpressCards.

2. If the eject button is extended, press it in until it

clicks.

3. Insert your ExpressCard into the slot with the

product label facing up. If you are inserting a 34 mm

card, be sure to align it with the left side of the slot

when inserting it.

4. Push the card firmly into the slot until it is seated in

the connector.

REMOVING EXPRESSCARDS

See your ExpressCard manual for specific instructions

on removing your card. Some cards may require your

notebook to be in Suspend Mode or Off during removal.

To remove an ExpressCard, follow these steps:

2. Unlock the card from the slot by pressing the eject

button associated with the slot in which the card is

located. When pressed, the button will pop out.

3. Firmly press the button again until it is flush with

the notebook. This will eject the card slightly out of

the slot allowing you to remove the card.

SMART CARD READER

A dedicated Smart Card Reader is provided on your

notebook (Figure 4-8). Smart Cards are the same size

and shape as credit cards, but they contain an integrated

microprocessor chip. The chip can hold a variety of

information, and provides you with many possible

options, such as allowing you to make secure purchases,

pay for phone calls, store security information, and

provide personal identification and information.

In order to use the Smart Card Reader, you must

purchase optional Smart Card third-party software.

Figure 4-8. Smart Card Slot

■

Inserting or removing an ExpressCard

during your notebook’s shutdown or

bootup process may damage the card

and/or your notebook.

■

Do not insert an ExpressCard into a slot

if there is water or any other substance

on the card as you may permanently

damage the card, your notebook, or

both.

You may be required to log on as Adminis-

trator or a member of the Administrator’s

Group to complete this procedure. If your

computer is connected to a network, net-

work policy settings may also prevent you

from completing this procedure.

54 mm ExpressCard

34 mm ExpressCard

ExpressCard Slot

(top slot)

■

Windows has a shutdown procedure for

ExpressCards that must be followed

before removing a card. (Review your

operating system manual for the correct

procedure.) It is good practice to remove

devices using the Unplug or Eject Hard-

ware icon in the system tray.

■

If the dialog box states that the device

cannot be removed, you must save all of

your open files, close any open applica-

tions and shut down your notebook.

Dedicated Smart Card slot

E8110.book Page 43 Tuesday, February 28, 2006 2:59 PM

1 ... 52 53 54 ... 128

Comments to this Manuals

No comments

Fujitsu LifeBook E8110 User Manual Page 53

Comments to this Manuals

Related products and manuals for Laptops Fujitsu LifeBook E8110