Fujitsu TeamPoS 7000 User Manual download pdf (Page 25)

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,

AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.

TeamPoS7000_User Guide_D900000454.pdf Chapter 3 - Basic Operations

Revision 1.0 - March 6, 2012 Using the (Optional) MSR - 23

3.5 Using the (Optional) MSR

The magnetic card reader reads information written on the magnetic stripe of a magnetic card.

NOTE:

• Use only the specified magnetic card reader.

• Keep magnetic stripes clean. If a magnetic stripe is contaminated with dust, oil or water, this

may cause an error, result in a magnetic head fault, or degrade the performance of the

magnetic head.

• Do not lubricate the magnetic card reader.

• If anything falls into the slot, use tweezers to remove it.

Data corruption:

Do not expose the magnetic card reader to strong magnetic fields, otherwise

the data may be lost.

1. Slide a magnetic card through the slot on the right side. Hold the card lightly, and slide it in

the slot on the right side, paying attention to the direction of the arrow.

2. Move the magnetic stripe card in the direction of the arrow. Move the magnetic card from

the far end of the slot to the front.

NOTE: The MSR reader may not be able to read the magnetic stripe card

correctly if the movement of the card is stopped midway, if the card is

not moved at a constant speed, or if the card is not moved parallel to

the slot.

1 ... 24 25 26 ... 50

No comments

Fujitsu TeamPoS 7000 User Manual Page 25