Fujitsu CELSIUS M470 Service Manual download pdf (Page 81)

System upgrades

A26361-K994-Z220-1-7619, Edition 2 73

Installing and removing a SmartCard reader

(optional)

You can operate a maximum of 2 internal USB components in your device. An adapter

cable (available as an option) will be needed for the second internal USB component (e.g.

a WLAN module or a MultiCard reader).

A carrier is needed to install a SmartCard reader in a 5¼ inch bay. When this carrier is

used, the SmartCard reader can be installed in the 5¼ inch bay instead of a Weight Saver

or a 5¼ inch drive.

Installing a SmartCard reader

Screw the SmartCard reader onto the carrier

► Push the SmartCard reader - with the

component side facing downwards - in the

direction of the arrow (1) into the guide of

the carrier (a).

► Secure the SmartCard reader with the

screws (2).

Installing SmartCard reader

► Open the casing (see "

Opening the casing").

► If there is a Weight Saver in the 5¼ inch bay, remove it as described in the chapter "

Installing

an accessible 5¼ inch drive".

1 ... 80 81 82 ... 94

No comments

Fujitsu CELSIUS M470 Service Manual Page 81