Fujitsu M1 User Manual download pdf (Page 26)

Overview

Security

The rack is suitable for installation and operation of rack management systems.

If rack devices with telescopic rails are used, it is necessary for security reasons

to ensure that racks are protected against tilting by means of suitable anti-tilt

protection. Optional available for Fujitsu Racks is an anti-tilt protection that can

be pulled out in case of service.

Standards

Each rack has power connections complying with European and international

standards. There are at least two multiple socket outlet distributions and two

power connections for configuration.

Due to the high leakage current of a fully fitted rack, CEE (IEC60309)

connectors are used. Connection kits for single-phase and three-phase supply

are available, as is a three-phase non-detachable connection. Reliable

grounding in the rack is ensured by the use of IEC60309 connectors.

The power supply components are ideal for these applications and the design

of the power supply ensures reliable and permanent grounding. IEC 60320

connectors are used inside the rack. If grounding in a power supply cable is

interrupted, the leakage current remains limited to < 3,5mA.

Summary of all rack types

V CAUTION!

The maximum transport weight may not exceed 1000 kg.

Base

unit

Type Dimensions

(W/D/H)

Max. pay load /

max. dynamic load

Net

weight

16 HU symmetrical 600x1050x847 mm 320 kg / 380 kg 60 kg

24 HU symmetrical 600x1050x1203 mm 480 kg / 565 kg 85 kg

42 HU symmetrical 600x1050x2003 mm 840 kg / 960 kg 120 kg

24 HU symmetrical 700x1050x1203 mm 480 kg / 590 kg 85 kg

42 HU symmetrical 700x1050x2003 mm 840 kg / 975 kg 120 kg

24 HU asymmetrical 700x1050x1203 mm 480 kg / 590 kg 85 kg

42 HU asymmetrical 700x1050x2003 mm 840 kg / 995 kg 120 kg

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 116 117

No comments

Fujitsu M1 User Manual Page 26