Fujitsu M4097D User Manual download pdf (Page 77)

7-5

2. Setting double feed detection (Paper Length)

1 Press or and let the

scanner display Screen 42.

2 Press either the or switch to set double feed detection according to paper length. The paper

length is checked using the difference between two consecutive sheets of paper fed from the ADF.

Each time either of these switches is pressed,the location of the blinking moves. When the

switch is pressed, the blinking moves from (1) to (3). When the switch is pressed, the blinking

moves in the opposite direction. However, if the setting by the host computer is valid, the location

of the blinking does not move when either switch is pressed.

(1) “No” is blinking: Paper length is not checked.

(2) “Yes” and “1” are blinking: Paper length is checked. However, a detected double feed

error is displayed on the screen only; processing is

continued.

(3) “Yes” and “2: Stop” are blinking: Paper length is checked. When the double feed error is

detected, the scan processing is stopped. The error is then

reported to the host.

If you want to disable the double feed, select “No” then press . Press to return.

After pressing , the scanner displays the screen 42-1.

3 Press either the or switch to set

double feed detection (paper length).

When the switch is pressed, the

blinking moves from (1) to (3). When the

switch is pressed, the blinking moves

in the opposite direction.

(1) The “10” is blinking: Threshold is 10mm

(2) The “15” is blinking: Threshold is 15mm

(3) The “20” is blinking: Threshold is 20mm

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 99 100

No comments

Fujitsu M4097D User Manual Page 77