7-9
<Screen B (Example of ADF Front Offset)>
3 At Screen A, if you want to let the offset
return to default, select “Yes” otherwise
“No” then press . The scanner
displays Screen B.
<Screen B (Example of ADF Back Offset)>
<Screen B (Example of FB Offset)>
<Screen C (Example of ADF Front Offset)>
4 At Screen B, press to increase the
offset or press to decrease offset.
The increment or decrement is 0.5 mm.
Then press to activate the setting.
The scanner displays Screen C.
<Screen C (Example of ADF Back Offset)>
<Screen C (Example of FB Offset)>
5 At Screen C, press to increase the
offset or press to decrease the offset.
Then press to activate the setting.
The scanner displays the next item of the
setup mode.
Comments to this Manuals