Fujitsu S752 Service Manual Page 86

  • Download
  • Add to my manuals
  • Print
  • Page
    / 99
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 85
Troubleshooting and tips
Acoustic warnings
Acousticerror messagesErrors
Cause
Troubleshooting
A beep sounds every few se conds.
The battery is almost at.
Charge the battery.
Error messages on the screen
Errormessages onthes c
reen
Errormessage:
This section describes the erro r m essages generated by the BIO S Setup. Error messages displayed
by the operating system or programme s are described in the relevant documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact th e place of purchase or our customer service centre.
Error messag e/cause Resolution
CMOS battery bad
If the error message occu rs repeatedly, the
buffer battery in the notebook is at.
Contact your sales outlet or our customer
service centre.
System CMOS checksum bad - default conguration
used
The system conguration information is
incorrect.
Switch the notebook off.
Switch the notebook on.
Press the function key
F2
to access the
BIOS Setup.
In the BIOS Setup, select the Exit menu.
Select the entry Load Setup Defaults .
Select OK and p ress the Enter key.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory an error has
resulted at the address xxxx.
Check wh ethe
r the additional memory
module has be
en inserted correctly.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
Start the B
IOS Setup (Primary Maste r
submenu)
and select the correct settings.
Keyboard controller error
Switch t
he notebook off with the ON/OFF
switch.
Wait 3 - 5 s econds and switch on the
notebook again.
Keyboard error
If you are using an external keyboard:
Check the connection and reboot the
notebook.
nn Stuck key
Make sure that no key i s pressed.
82 Fujitsu Technology Solutions
Page view 85
1 ... 85 86 87 ... 99

Comments to this Manuals

No comments