Fujitsu B3020 User Manual download pdf (Page 26)

Getting to Know Your LifeBook

Figure 2-20. Dragging on the Touch Screen

Right-clicking

It is possible for you to perform right-click functions

with the stylus.

1. Click Start -> Programs -> Fujitsu Touch Panel

-> Touch Panel Configuration.

2. When the Right Button Tool screen appears, select

either “Hold [Ctl] key down and touch the screen”

or “Press [Ctl] key and touch the screen”.

When you select “Hold [Ctl]...”, the stylus will act as

a right mouse button when you hold down the

control key while touching the screen.

When you select “Press [Ctl]...”, pressing the control

key before touching the screen will cause the stylus

to act as a right mouse button.

3. Click [Apply] to complete your selection.

Calibrating the Touch Screen

In order to ensure accurate tracking between the stylus

and cursor, you should run the Touch Screen Calibra-

tion Utility before you use the touch screen for the first

time, or after you change the display resolution.

To run the calibration utility:

1. Go to [Start] -> Control Panel, and double-click on

the Touch Panel icon. This will open the Touch

Panel Settings window.

2. Select the Calibration tab and click the [Calibrate

Now] button.

3. Adjust the display of your notebook to a comfortable

angle and find the red (+) symbol in the upper-left

corner of the display.

4. Using the stylus, touch the screen directly on the (+)

symbol, then lift the stylus. When you lift the stylus

tip, the (+) symbol will move to the next location.

4. Repeat step 4 until you have selected a total of nine

symbols. This is the minimum number of points

necessary to calibrate your touch screen.

5. Once you have selected the nine symbols, click the

[Update] button to return to the Touch Panel

Settings screen.

B Series.book Page 19 Friday, April 23, 2004 11:41 AM

1 ... 25 26 27 ... 115

No comments

Fujitsu B3020 User Manual Page 26