Fujitsu B3020 User Manual download pdf (Page 52)

User Installable Features

10. Replace the cover.

11. Replace the screw.

CHECKING THE COMPUTER RECOGNITION

OF NEW MEMORY CAPACITY

Once you have changed the system memory capacity, be

sure to check that your notebook has recognized the

change.

You can check the memory capacity by looking at the

main menu of the BIOS setup:

1. Turn on the power to your notebook.

2. Allow the system to start booting and press the [F2]

key once the Fujitsu logo appears on the screen. This

will open the main menu of the BIOS setup. Go to

the Info tab to view the current settings. See “BIOS

Setup Utility” on page 29.

The System Memory and the Extended Memory

capacity, as detected by your notebook during the Power

On Self Test (POST), are displayed at the bottom of the

main menu screen.

The memory upgrade module is not

something you routinely remove from

your notebook. Once it is installed, you

should leave it in place unless you want

to change system memory capacity.

If the total memory displayed is incorrect,

check that your memory upgrade module

is properly installed. If the module is

properly installed and the capacity is still

not correctly recognized, see

“Troubleshooting” on page 53.

B Series.book Page 45 Friday, April 23, 2004 11:41 AM

1 ... 51 52 53 ... 115

No comments

Fujitsu B3020 User Manual Page 52